F150-M05L Omron, F150-M05L Datasheet - Page 11

• Manufacturer Part Number: F150-M05L
• Description: 5.5Panel Mnt. Clr LCD Monitor
• Manufacturer: Omron

Specifications of F150-M05L

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Laser Safety
The Z300-S2T, Z300-Z5T and Z300-S10 Sensor Heads are
Class 2 Laser Products according to EN60825-1 (IEC60825-
1) and Class II Laser Product according to FDA (21
CFR1040.10) (see note). The Z300-S60 Sensor Head is a
Class 3B and Class IIIB Laser Product, respectively. The
Z300 Series is meant to be built into final system equipment.
Pay special attention to the following precautions for the safe
use of the product:
Note: Europe: Class 2 and Class 3B of EN60825-1: 1994 = IEC60825-1: 1993
Precautions
Warming up
After turning on the power, wait about 30 minutes before using
the equipment. The circuits are not stable after turning on the
power, and thus measured values tend to gradually drift.
Z300
Wavelength 650 nm
Peak power 1 mW max.
Class
Maximum
pulse duration
Period
U.S.A.: Class II and Class IIIB of FDA (21 CFR1040.10)
2
7 ms
0.5 to 10 ms
Z300-S2T
670 nm
Z300-S5T
Z300-S10
658 nm
15 mW max.
3B
17.5 ms
0.5 to 25
ms
Z300-S60
(1)Use this product as specified in the operation manual. Oth-
(2)The Z300 series radiates laser beams in the visible light
(3)To avoid exposure to hazardous laser radiation, do not dis-
(4)The user should return the product to OMRON for all repair
(5)As for countries other than those of Europe and the U.S.A.,
erwise, you may be exposed to hazardous laser
radiation.
range. Do not expose your eyes directly to the laser radi-
ation. Ensure that the laser beam path is terminated dur-
ing use. If a mirror or shiny surface is positioned in the
laser beam path, ensure that the reflected beam path is
also terminated.
If the Unit must be used without terminating the laser beam
path, position the laser beam path so that it is not at eye
level.
place nor remove the protective housing during operation,
maintenance, and any other servicing.
and servicing.
observe the regulations and standards specified by each
country.
B-41