H3DS-SL AC24-230/DC24-48 Omron, H3DS-SL AC24-230/DC24-48 Datasheet
H3DS-SL AC24-230/DC24-48
Specifications of H3DS-SL AC24-230/DC24-48
Z2395
Related parts for H3DS-SL AC24-230/DC24-48
H3DS-SL AC24-230/DC24-48 Summary of contents
Page 1
... Enables easy sequence checks through instantaneous outputs for a zero set value at any time range. • Incorporates environment-friendly, cadmium-free contacts. • Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives. ■ Broad Line-up of H3DS Series H3DS-M/S/A Standard Timer Twin Timer ...
Page 2
... Solid-state Multi-functional Timer H3DS-M/-S/-A • Eight operating modes (H3DS-M) and four operating modes (H3DS-S) cover a wide range of applications. • A wide time setting range of 0. 120 h. • Two LEDs indicate power and relay status respectively. Model Number Structure ■ Model Number Legend ...
Page 3
... Accessories (Order Separately) Lock Key Mounting Track End Plate Spacer http://www.ia.omron.com (l) x 7 (l) x 7 (t) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-M/-S/-A Y92S-38 PFP-50N PFP-100N PFP-100N2 PFP-M PEP-S 3 ...
Page 4
... Timer with a solid-state output such as a sensor. 3. The power consumption is for mode A after the Timer counts the time-up time and for the AC input at 50 Hz. The power consumption of the H3DS-ML includes the input circuit with the B1 and A1 terminals short-circuited. http://www.ia.omron.com/ ...
Page 5
... EN61000-4- contact discharge (level air discharge (level 3) EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3) EN61000-4- power port and output port (level control port with capacitive clamp (level 3) EN61000-4- common mode (level differential mode (level 3) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-M/-S/-A 5 ...
Page 6
... Outputs are turned ON according to designated out- put mode when preset value is reached. (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-M/-S/-A Operating mode selector Output circuit Indicator circuit Power-ON Output indicator indicator Operating mode selector Output circuit Indicator circuit Power-ON Output indicator indicator H3DS-SL@/-AL@ 6 ...
Page 7
... Note supply voltage does not require the designation of polarity. 2. The contact symbol for the H3DS is indicated with contact for conventional timers. ■ Input Connections The inputs of the H3DS-ML@ are voltage (voltage imposition or open) inputs. No-contact Input (Connection to PNP output sensor.) Sensor ...
Page 8
... Selection of Operating Mode (except for H3DS-AL) The H3DS-ML/-SL can be set to any one of the operating modes Turn the operating mode selector with a screwdriver until the desired operating mode appears in the operating mode display win- dow. ...
Page 9
... Output relay and 16 Output relay: NO (output indicator) 15 and 18 Power indicator Note: The start input of the H3DS-ML@ model is activated by applying a voltage to B1 and A2 terminals. The voltage can be applied by turning on the contact between B1 and A1 (Refer to Terminal Arrangement). http://www.ia.omron.com/ Timing chart t– t– ...
Page 10
... Output relay: NO 1±0.6 s (output indicator) (fixed) 15 and 18 Power indicator Note: The start input of the H3DS-ML@ model is activated by applying a voltage to B1 and A2 terminals. The voltage can be applied by turning on the contact between B1 and A1 (Refer to Terminal Arrangement). http://www.ia.omron.com/ Timing chart t–a t–a t t– ...
Page 11
... Operating mode display window and selector (select the mode from and J for the H3DS-ML, from A, B2, E, and J for the H3DS-SL) (Front View) H3DS-AL@ Output indicator (orange) (Lit while Timer output is ON.) Set time window ...
Page 12
... ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. http://www.ia.omron.com/ Surface color: Light gray 5Y7/1 (OMRON) 17 (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-M/-S/-A 12 ...
Page 13
... Combinations of long ON- or OFF-time and short OFF- or ON- time setting are possible. • Long time range from 0 for both ON and OFF time settings. Model Number Structure ■ Model Number Legend H3DS - Twin timers 2. L: Smart lock mechanism 3. None: Screw terminal type C: ...
Page 14
... Contact output 250 VAC with resistive load (cosφ VDC with resistive load (cosφ Operating: –10°C to 55°C (with no icing) Storage: –25°C to 65°C (with no icing) Operating: 35% to 85% (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F max. bar terminals without sleeves. max. bar terminals without sleeves. 14 ...
Page 15
... EN61000-4- contact discharge (level air discharge (level 3) EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3) EN61000-4- power port and output port (level control port with capacitive clamp (level 3) EN61000-4- common mode (level differential mode (level 3) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F 15 ...
Page 16
... DC supply voltage does not require the designation of polarity. http://www.ia.omron.com/ OFF indicator (Green) ON/OFF start selector Indicator circuit ROM RAM Clock One-chip microcomputer H3DS-FLC H3DS- (See note 2.) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F Time scale selector Output circuit 16 ...
Page 17
... To unlock, turn the Lock Key in the opposite direction. Timing chart 0.1 s min OFF ON OFF ON OFF ON OFF OFF OFF ON OFF ON OFF ON OFF (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F Key hole set time OFF set time OFF 0.1 s min set time OFF set time OFF 17 ...
Page 18
... Lock for OFF-time scale selector (Front View) Attach the enclosed label here as a nameplate. (The label is attached to the Timer's DIN Track hook section at the time of shipment.) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F Wire connection holes Release holes Wire connection holes 18 ...
Page 19
... To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. http://www.ia.omron.com/ Surface color: Light gray 5Y7/1 (OMRON) 17 Surface color: Light gray 5Y7/1 (OMRON (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F 19 ...
Page 20
... Solid-state Star-delta Timer H3DS-G • A wide star-time range (up to 120 seconds) and star-delta trans- fer time range ( second) Model Number Structure ■ Model Number Legend H3DS - Star-delta timer 2. L: Smart lock mechanism 3. None: Screw terminal type C: Screw-Less Clamp type Ordering Information ■ ...
Page 21
... W max. (typical: 0 VDC Contact output 250 VAC with resistive load (cosφ VDC with resistive load (cosφ Operating: –10°C to 55°C (with no icing) Storage: –25°C to 65°C (with no icing) Operating: 35% to 85% (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G 21 ...
Page 22
... EN61000-4- contact discharge (level air discharge (level 3) EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3) EN61000-4- power port and output port (level control port with capacitive clamp (level 3) EN61000-4- common mode (level differential mode (level 3) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G 22 ...
Page 23
... Star output is turned OFF when the dial set value is reached and delta output is ON after the preset transfer time elapses H3DS-GLC H3DS- (see note) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G Star operation Output circuit Delta operation Indicator circuit Delta operation indicator 23 ...
Page 24
... Lock Key in the keyhole to the lower right of the dial or selector and turn it clockwise until the dial or selector is completely covered with the red cover. To unlock, turn the Lock Key in the opposite direction. 0 (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G Key hole 24 ...
Page 25
... Star operation indicator (green (Front View) Attach the enclosed label here as a nameplate. (The label is attached to the Timer's DIN Track hook section at the time of shipment.) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G Wire connection holes Release holes Wire connection holes 25 ...
Page 26
... To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. http://www.ia.omron.com/ Surface color: Light gray 5Y7/1 (OMRON) 17 Surface color: Light gray 5Y7/1 (OMRON) 17 (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G 26 ...
Page 27
... Solid-state Two-wired Timer H3DS-X • Covers wide range of supply voltage (24 to 230 VAC/VDC). Model Number Structure ■ Model Number Legend H3DS - Two-wired timer 2. L: Smart lock mechanism 3. None: Screw terminal type C: Screw-Less Clamp type Ordering Information ■ List of Models Supply voltage ...
Page 28
... Minimum power-off time: 0.1 s 1.0 VAC/VDC max max max. SCR output 0.7 A Operating: –10°C to 55°C (with no icing) Storage: –25°C to 65°C (with no icing) Operating: 35% to 85% (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-X 28 ...
Page 29
... EN61000-4- power port and output port (level control port with capacitive clamp (level 3) EN61000-4- common mode (level differential mode (level 3) Zero setting Time scale/ detection unit selectors circuit Oscillation Counting circuit circuit (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-X Indicator circuit Output circuit 29 ...
Page 30
... Lock Key in the keyhole to the lower right of the dial or selector and turn it clockwise until the dial or selector is completely covered with the red cover. To unlock, turn the Lock Key in the opposite direction. (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-X Key hole 30 ...
Page 31
... ON.) (Front View) Attach the enclosed label here as a nameplate. (The label is attached to the Timer's DIN Track hook section at the time of shipment.) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-X Wire connection holes Release holes Wire connection holes 31 ...
Page 32
... ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. http://www.ia.omron.com/ Surface color: Light gray 5Y7/1 (OMRON) 17 (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-X 32 ...
Page 33
... Note the overall diameter of the wire is less than 1.8 mm, do not insert the wire past the conductor. Refer to the following di- agrams the overall diameter of the wire is over 2.8 mm, it will be difficult to use double wiring. http://www.ia.omron.com/ H3DS-@LC (c)Copyright OMRON Corporation 2007 All Rights Reserved. 33 ...
Page 34
... Fig. 2 Wire Connection Holes and Release Holes Wire connection hole Release hole Fig. 3 Section A-A of Fig Insert the exposed conductor into the wire connection hole. 3. Pull out the screwdriver. http://www.ia.omron.com Insert Screwdriver Insert Insert Pull out (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-@LC 34 ...
Page 35
... Always insert the screwdriver straight into the hole, never at an angle. The clamp spring may be deformed if the screwdriver is not straight. Do not move the screwdriver side to side in the clamp hole. The clamp spring may be deformed if the screwdriver is moved sideways. http://www.ia.omron.com/ H3DS-@LC (c)Copyright OMRON Corporation 2007 All Rights Reserved. 35 ...
Page 36
... End Plate PFP pan head screw http://www.ia.omron.com/ 6.4 PFP-100N2 7.3±0.15 4.5 35±0.3 27±0. 1,000 Spacer PFP-S 10 6.2 1.8 1 35.5 35.5 1.8 1.3 4.8 (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS 16 27 29.2 24 35±0 1 34.8 44.3 16.5 36 ...
Page 37
... Timer may not start due to inrush current (approx that may flow for an instant when the Timer is turned on. For the power supply of an input device of the H3DS-ML@, use an isolating transformer, of which the primary and secondary windings are mutually isolated and the secondary winding is not grounded. ...
Page 38
... Conformance The H3DS as a built-in timer conforms to EN61812-1 provided that the following conditions are satisfied: The output section of the H3DS is provided only with basic isolation. To ensure reinforced isolation required by the EN61812-1, provide supplementary basic isolation on the load side connected to the out- Power supply put ...
Page 39
... Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specifi ed) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS ...