WL-1A200 Omron, WL-1A200 Datasheet - Page 42

• Manufacturer Part Number: WL-1A200
• Description: LEVER
• Manufacturer: Omron

Specifications of WL-1A200

• Rohs Compliant: YES
• Accessory Type: Lever
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: WL Series
• For Use With: WLCA2-7-TS - SWITCH LIMIT DPST 6A ROLLR LEVER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: WL1A200

Operation of Fork Lever Locks
The fork lever lock is configured so that the dog pushes the lever to reverse the output and this reversed state is maintained even after
the dog continues on. If the dog then pushes the lever from the opposite direction, the lever will return to its original position.
Example
Installing the Roller on the Inside
By installing the roller lever in the op-
posite direction, the roller can be in-
stalled on the inside. (Set so that
operation can be completed within a
180° level range.)
Selecting the Roller Position
There are four types of fork lever lock
for use depending on the roller posi-
tion.
Adjusting the Length of the Rod or
Lever
The length of the rod or lever can be
adjusted by loosening the Allen-head
bolt.
NC terminal: ON
Item
NO terminal: ON
Roller Levers:
WLCA@, WL01CA@, WLH@, WL-
CA@-2, WL01CA@-2, WLMCA2@,
WLMH2@, WLMG2@, WLMGCA2@,
WLG@, except for the adjustable roller
levers.
Fork Lever Locks:
WLCA32-4@, WL01CA32-4@
Fork Lever Locks:
WLCA32-4@, WL01CA32-4@
Adjustable Roller Levers:
WLCA12, WL01CA12 etc.
Adjustable Rod Levers:
WLCL, WL01CL, etc.
Applicable models and Actuators
NO terminal: ON
Note: An explanation of the operation of fork lever locks is provided after
WLCA12 etc.
Loosen this
Allen-head bolt
and adjust the
length of the
lever.
Loosen the
Allen-head bolt.
this table.
WLCA32-41
WLCA32-42
Adjustment range radius:
25 to 89 mm
Details
WLCA32-43
WLCA32-44
WL/WLM
Loosen this
Allen-head bolt
and adjust the
length of the rod.
42