XS5W-D421-G81-A Omron, XS5W-D421-G81-A Datasheet - Page 8

• Manufacturer Part Number: XS5W-D421-G81-A
• Description: Sensor I/O Connector
• Manufacturer: Omron
• Series: XS5Wr

Specifications of XS5W-D421-G81-A

• Connector Type: Circular 04 pos Female to Male
• Length: 16.40' (5m)
• Cable Type: Round
• Color: Black
• Shielding: Unshielded
• Usage: Industrial Environments - IP67
• Product: I/O Assemblies
• Connector End A: Waterproof Smartclick
• Connector End B: Waterproof Smartclick
• Connector End A Pin Count: 4
• Connector End B Pin Count: 4
• Current Rating: 4 A
• Features: Connected to cable, socket and plug on cable ends
• Gender: Female / Male
• Voltage Rating: 250 VAC
• Brand/series: XS5
• Cable End 1, Connector Angle: Straight
• Cable End 1, Connector Type: Socket
• Cable End 2, Connector Type: Plug
• Ip Rating: IP 67
• Length, Cable: 5 m
• Number Of Conductors: 4 Conductors
• Cable Length - Metric: 5m
• Jacket Color: Grey
• Connector Type B: M12 Sensor 4 Pos. Plug
• Connector Type A: M12 Sensor 4 Pos. Receptacle
• Cable Assembly Type: Sensor
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: XS5WD421G81A; Z2800

Connecting the XS5
1. Connecting the XS5 Plug and Socket
2. Connecting the XS5 and XS2
• Align the projection on the plug cover with the polarity key on the
• Hold the knurled socket grip, then insert the projection on the plug
• Turn the knurled grips of the socket clockwise approximately 45
• Align the projection on the plug cover with the polarity key on the
• In the same way as when connecting two XS2 Connectors, screw
• Use your fingers to tighten the Connectors sufficiently.
socket, then insert the plug all the way in.
into the groove of the socket.
degrees in respect to the plug. A click will indicate that the
Connectors are locked. The locking condition can also be
confirmed by the alignment marks on the plug and socket.
socket, then insert the plug all the way in.
the knurled grip in the clockwise direction.
Alignment marks
http://www.ia.omron.com/
Polarity key
Protrusion on
cover aligns with
polarity key.
Safety Precautions
Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
Connector Connection and Disconnection
Wiring
Degree of Protection
• When connecting or disconnecting Connectors, be sure to hold the
• Do not hold the cable when disconnecting Connectors.
• When joining Connectors, be sure to insert the plug all the way to
• Do not use tools of any sort to join the Connectors. Always use your
• When joining the Connectors to XS2 or other M12 Connectors,
• Always confirm wiring diagrams before wiring sensors, limit
• Lay the cables so that external force is not applied to the
• The degree of protection of Connectors (IP67) is not for a fully
• Do not step on or place any objects on the Connectors. Doing so
Connectors by hand.
the back of the socket before attempting to lock the Connectors.
hands. Pliers or other tools may damage the Connectors.
tighten the lock by hand to a torque of 0.39 to 0.49 N⋅m.
switches, or other devices.
Connectors. Otherwise, the degree of protection (IP67) may not be
achieved.
watertight structure. Do not the Connectors underwater.
may damage the Connectors.
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
Precautions for Correct Use
XS5
8