BR23S BANNER ENGINEERING, BR23S Datasheet

no-image

BR23S

Manufacturer Part Number
BR23S
Description
FIBER BR23S
Manufacturer
BANNER ENGINEERING
Type
Bifurcated Fibrer
Datasheet

Specifications of BR23S

Fiber Optic Sensor Type
Bifurcated Fibre
Glass Fibre-optics
Glass Fibre-optic Specifications
Construction:
Combination of optical glass fibre, stainless steel,
PVC, brass, silicon rubber, Teflon™, moulded
thermoplastics, and optical grade epoxy. Optical
fibre is F2 core, EN1 clad, except where stated.
Flexible steel interlock sheathing is 302 stainless,
except where stated.
Sensing Range:
Refer to the range specifications shown on the
glass fibre-optic drawing pages.
Bend Radius:
Inside bend radius must be 12 mm or greater for
PVC covered fibre-optic assemblies, and 25 mm or
greater for stainless steel armoured cable covered
fibres.
Numbering scheme for Banner glass fibres
FIBRE BUNDLE DIAMETER designator:
.44 = 0,7 mm
.5 = 0,8 mm
.75 = 1,2 mm
1 = 1,6 mm
1.5 = 2,3 mm
2 = 3,2 mm
2.5 = 4 mm
ASSEMBLY STYLE designator:
B = Bifurcated: emitter and receiver
DB = Double Bifurcated: emitter and
I = Individual: emitter or receiver to
SENSING END TIP STYLE designator:
A = Angled tip (90º)
AM = Angled tip (90º), probe 1,5 mm ø
AMM = Angled tip (90º), probe 1,1 mm ø
AR = Angled tip (90º), rectangular bundle termination
AT = Angled (90º) and threaded tip
ATR = Angled (90º) and threaded tip, rectangular bundle
F = Ferruled tip, same as sensor end tip
FR = Ferruled tip, rectangular bundle termination
HA = Half-angled tip (45º)
HAR = Half-angled tip (45º), rectangular bundle
HAT = Half-angled (45º) and threaded brass tip
HATR = Half-angled and threaded tip, rectangular bundle
M = Miniature tip (ø 1,5 mm)
MAP = Miniature angled (90º) probe tip
26
one sensing point
to one sensing point
receiver to two sensing points
I A T 2 3 S X X
OVERALL LENGTH designator (length of the
complete fibre-optic assembly in feet):
3 = 3 ft. = ±914 mm
6 = 6 ft. = ±1829 mm
MHAP = Miniature half-angled (45º) probe tip
MM = Micro-miniature probe tip (ø 1,1 mm)
MT = Threaded brass end tip
MTAP = Threaded brass, miniature angled (90º) tip
MTHAP = Threaded brass, miniature half-angled (45º) tip
MTP = Threaded brass, miniature probe (ø 1,5 mm)
P = Probe bendable tip (ø 2,3 mm)
R = Rectangular bundle termination
T = Threaded brass end tip
TA = Threaded angled (90º) end tip
TAR = Threaded, rectangular bundle
THA = Threaded, half-angled (45º) end tip
THAR = Threaded and half-angled (45º), rectangular bundle
TR = Threaded end tip, rectangular bundle termination
Length:
Standard length for assemblies is 61 cm or 91 cm;
see dimension drawings. Most models are available
from the factory with shorter or longer cable
lengths, up to 18 m maximum.
Operating Temperature:
• Fibre assemblies with stainless steel sheathing
• Fibre assemblies with PVC sheathing and/or
• Special order assemblies with stainless steel
• Special order assemblies with stainless steel
and metal end tips: -140 to +249° C.
plastic end tips: -40 to +105° C.
sheathing and metal end tips and model suffix
“M600”: -140 to +315° C.
sheathing and metal end tips and model suffix
“M900”: -140 to +480° C.
SHEATHING MATERIAL designator:
S = Stainless steel flexible conduit
P = PVC with galvanised monocoil reinforcing wire
L = Silicone rubber tubing (max. flexibility, min. fibre protec-
T = Teflon tubing (max. chemical resistance, min. flexibility)
HDP = High-density polyethylene (max. electrical isolation,
tion)
min. flexibility)
MODIFICATIONS designator (suffix may be
any length):
M600 suffix = available in 315º C
M900 suffix = available in 480º C
Fibre-optic Selection Guide

Related parts for BR23S

BR23S Summary of contents

Page 1

Glass Fibre-optics Glass Fibre-optic Specifications Construction: Combination of optical glass fibre, stainless steel, PVC, brass, silicon rubber, Teflon™, moulded thermoplastics, and optical grade epoxy. Optical fibre is F2 core, EN1 clad, except where stated. Flexible steel interlock sheathing is 302 ...

Page 2

Dimensions (in mm) BA23S Bifurcated angled ø 4,7 ø 7,4 12,7 12,7 191 BMP.753P Bifurcated miniature probe, glass fibre, PVC sheathing ø 7,4 ø 4,7 12,7 16,5 191 BMT.442P Bifurcated miniature threaded, glass fibre, PVC sheathing ø 7,4 ø 4,7 ...

Page 3

... Glass Fibre-optics Dimensions (in mm) BR2.53S Bifurcated rectangular ø 4,7 ø 7,4 12,7 12,7 191 BR23S Bifurcated rectangular ø 7,4 ø 4,7 12,7 12,7 191 BT13SM8 Bifurcated threaded, glass fibre, SS sheathing ø 7,4 ø 4,7 12,7 12,7 191 BT23SM8 Bifurcated threaded, glass fibre, SS sheathing ø ...

Page 4

Dimensions (in mm) BT23SM900 Bifurcated threaded, glass fibre, SS sheathing, special high- temperature 480° C end tip construction ø 4,7 ø 7,4 12,7 12,7 191 IA23S Individual angled 914 ø 4,7 ø 7,4 12,7 12,7 IAR.753SMTA Individual tight angle with ...

Page 5

Glass Fibre-optics Dimensions (in mm) IR23S Individual rectangular ø 4,7 ø 7,4 12,7 12,7 914 IT13SM8 Individual threaded, glass fibre, SS sheathing ø 7,4 ø 4,7 12,7 12,7 IT23SM8 Individual threaded, glass fibre, SS sheathing ø 7,4 ø ...

Page 6

QS18 D11(E) Q23 Dimensions (in mm) BMT13SMVF* Bifurcated miniature threaded, glass fibre, SS sheathing, special vacuum construction; may be used with VFT- M8MVS feed-throughs termination A ø 4,7 ø 4 ø termination B IMT.753SMVF Individual miniature threaded, glass ...

Page 7

D10 Glass Fibre-optics Dimensions (in mm) BMT16.6S-HT Bifurcated miniature threaded, glass fibre, SS sheathing, special high-temperature 315˚ C end tip construction; D10 sensors ONLY ø 4,6 ø 3 ø 2,2 25,4 150 IMT.756.6S-HT Individual miniature threaded, glass fibre, SS sheathing, ...

Page 8

Dimensions (in mm) Glass Fibre-optic Lens Attachments L9M8* • Glass lens with anodised blue aluminum housing • Used to extend the range of opposed mode glass fibre-optics systems (e.g. IT13SM8, IT23SM8) • Used also with a bifurcated fibre (BT13SM8) for ...

Page 9

D10 Expert Series Sensors D10 Expert Series Sensors Advanced fibre-optic sensors for use with plastic fibres. • Easy-to-set automatic Expert-style TEACH options* including static, dynamic, and single point programming plus manual adjustment for fine-tuning • 16-bit micro-controller and 12-bit analogue-to- ...

Page 10

D10 Expert Series Plastic Fibre-optic – Dual-Discrete Output Models Light Source Models VISIBLE RED D10DPFP 680 nm D10DPFPQ VISIBLE RED D10DNFP 680 nm D10DNFPQ VISIBLE GREEN D10DPFPG 525 nm D10DPFPGQ VISIBLE GREEN D10DNFPG 525 nm D10DNFPGQ D10 Expert Series Plastic ...

Page 11

D11 Series Sensors D11 Series Sensors D11 Expert Series – economical TEACH-mode fibre-optic sensors. Available with red, green, blue and white LEDs, D11E fibre-optic sensors provide powerful, compact, DIN-rail-mountable options for sensing and registration control. They are low-cost, high- power, ...

Page 12

Models Switching Threshold D11EP6FP Just above dark con- D11EP6FPQ dition D11EN6FP Just above dark con- D11EN6FPQ dition D11E2P6FP Midway between dark D11E2P6FPQ and light condition D11E2N6FP Midway between dark D11E2N6FPQ and light condition Models Cable D11SP6FP 2 m cable ø ...

Page 13

Mini-Beam™ Expert Series Sensors Mini-Beam™ Expert Series Sensors Millions of sensors in use. The MINI-BEAM is the world’s most popular miniature photoelectric sensor. With millions of units in use worldwide, it has become the bench- mark for small photoelectrics. Fact ...

Page 14

MINI-BEAM™ Expert Series Plastic Fibre-optic Models (Visible Red 650 nm) Models Cable Supply Voltage 5-wire SME312FP 10 to 30V cable M12 x 1, SME312FPQD 10 to 30V dc 5-pin MINI-BEAM™ Expert Series Glass Fibre-optic Models (Visible Red ...

Page 15

R55F Series Sensors R55F Series Sensors Microprocessor-based programming achieves unsurpassed resolution. Advanced programming features enable the R55F to reliably detect 16 levels of greyscale 10.000 actuations per second, resulting in outstanding colour contrast sensitivity for all of ...

Page 16

Light Source Models Cable Red LED R55FP 2 m cable Red LED R55FPQ M12 x 1 Green LED R55FPG 2 m cable Green LED R55FPGQ M12 x 1 White LED R55FPW 2 m cable White LED R55FPWQ M12 x 1 ...

Page 17

D12 Series Sensors D12 Series Sensors high-speed and high-power sensors. • Models for use with Banner glass fibre-optic assemblies • Standard models have fast 500 µs (0,5 ms) output response; high-speed models (model suffix “Y” or “Y1”) have selectable 500 ...

Page 18

D12 Standard Series Glass Fibre-optic Models (500 µs Output Response – Visible Red 680 nm) Models Cable Supply Voltage D12SP6FV 2 m cable D12SP6FVQ ø QD 30V dc 4-pin D12SN6FV 2 m cable D12SN6FVQ ø 8 ...

Page 19

QS18FP Series Sensors – FI22FP Series Sensors QS18FP Series Sensors An affordable solution for use with low-cost plas- tic fibres. The QS18 accommodates large core 0,75 mm and 1,5 mm and small core 0,25 mm and 0,5 mm ...

Page 20

Models Cable Supply Voltage QS18VP6FP 2 m, 4-wire QS18VP6FPQ ø QD 30V dc 4-pin, pigtail QS18VN6FP 2 m, 4-wire QS18VN6FPQ ø QD 30V dc 4-pin, pigtail Style Model ø 8 mm, 4-pin ...

Page 21

... International Sales Representative List Worldwide Representation EUROPE Finland Sarlin Oy Ab Corporate Office Belgium: P.O. Box 750 Banner Engineering Belgium B.V.B.A. SF-00101 Helsinki 10 Koning Albert 1 laan, 50 Tel: 358-9- B-1780 Wemmel Fax: 358-9-56 33 227 Belgium e-mail: sales.automation@sarlin.com Tel: 32-2-456 07 80 http://www.sarlin.com Fax: 32-2-456 07 89 e-mail: mail@bannerengineering ...

Page 22

... Brazil NORTH AMERICA Banner Brazil (Portuguese language): http://www.bannerengineering.com.br Headquarters USA: Sensor do Brasil Banner Engineering Corp. Rua Jordão Schiavetto, 436 9714 10th Avenue North Hortolândia – SP 1318-080 Minneapolis, Minnesota 55441 Tel: 55-19-3897-9400 Tel: 1-763-5443164 Fax: 55-19-3897-9414 ...

Page 23

... Fax: 86-21 6427 1936 e-mail: tecnoa@iwm.com.mx e-mail: mzhang@bannerengineering.com http://www.bannerengineering.com.cn TESLA Encinos Ote. 13 Arcos del Alba Banner Engineering Taiwan Rep. Office Cuatitlán Izcalli, Edo. de México 11 Floor, Section 4, #6 Shin Yi Rd. Tel: 52-5-871-3468 Taipei 106 Fax: 52-5-873-2454 Tel: 886-2-5556 2488 e-mail: tesla@att ...

Page 24

... Israel Robkon Industrial Control & Taiwan R.O.C. Automation Ltd. 12-A Elimelech St. Banner Engineering International, Inc. Taipei Rep. Office Ramat-gan, 52424 11 Floor, Section 4, #6 Shin Yi Rd. Tel: 972-3-673 28 21 Taipei 106 Fax: 972-3-673 84 20 Tel: 886-2-5556 2488 e-mail: robkonfr@inter ...

Page 25

... Product Index Sorted by Model Number Model . . . . . . . . .Page BA23S . . . . . . . . . . . . .3900100 . . . . . . . . . .27 BMP.753P . . . . . . . . . . .3937700 . . . . . . . . . .27 BMT.442P . . . . . . . . . . .3021310 . . . . . . . . . .27 BMT.753P . . . . . . . . . . .3919200 . . . . . . . . . .27 BMT13SMVF . . . . . . . . .3065967 . . . . . . . . . .31 BMT16.6S- .3064397 . . . . . . . . . .32 BR2.53S . . . . . . . . . . . .3915300 . . . . . . . . . .28 BR23S . . . . . . . . . . . . .3913100 . . . . . . . . . .28 BT13SM8 . . . . . . . . . . .3923300 . . . . . . . . . .28 BT23SM8 . . . . . . . . . . .3903300 . . . . . . . . . .28 BT23SM900 . . . . . . . . .3923500 . . . . . . . . . .29 D10DNFP . . . . . . . . . . .3062379 . . . . . . . . . .35 D10DNFPG . . . . . . . . . .3064561 . . . . . . . . . .35 D10DNFPGQ . . . . . . . . .3064562 . . . . . . . . . .35 D10DNFPQ . . . . . . . . . .3062380 . . . . . . . . . .35 D10DPFP . . . . . . . . . . .3062382 . . . . . . . . . .35 D10DPFPG . . . . . . . . . .3064564 . . . . . . . . . .35 D10DPFPGQ ...

Page 26

Model . . . . . . . . .Page PIPS26U . . . . . . . . . . . .3035041 . . . . . . . . . .14 ...

Page 27

... Call, write or email and get your copy today! Banner Engineering Corp. 9714 10th Avenue North Minneapolis, MN 55441 USA Tel: 1-763-544.3164 – Fax: 1-763-544.3213 e-mail: sensors@bannerengineering.com P/N 112105 • 03-03 Advanced precision measurement sensors solve a wide variety of difficult sensing applications ...

Related keywords