1200-001001 Storm Interface, 1200-001001 Datasheet - Page 9

• Manufacturer Part Number: 1200-001001
• Description: CONNECTOR CABLE, 2.5M, PS2
• Manufacturer: Storm Interface
• Series: STORM 2200r

Specifications of 1200-001001

• Svhc: No SVHC (18-Jun-2010)
• Connector Type: PS/2
• Connector Type A: Molex Socket
• Connector Type B: 6 Way Mini DIN
• Lead Length: 2.5m
• Accessory Type: Cable Assembly
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Storm Keyboards
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Section 4. Connectors and Connections - Matrix Output
The 6000 Series matrix keypad is supplied without a cable so that the user can select the correct cable length.
Switches provide a momentary contact between designated connector pins. Pins are to suit Molex KK Type 0.1”
Pitch Headers. The Connector Details below shows the orientation and position of the connector.
If RS232 output is required then the Storm 420 Series Encoder may be purchased separately - this plugs in directly
to the rear of the keypad.
This document is provided for use and guidance of engineering personnel engaged in the installation or application of STORM data entry products manufactured by Keymat Technology Ltd.
Please be advised that all information, data, and illustrations contained within this document remain the exclusive property of Keymat Technology Ltd. and are provided for the express and
exclusive use as described above. This document is not supported by Keymat Technology’s engineering change note, revision or reissue system. Data contained within this document is subject
to periodic revision, reissue or withdrawal. Whilst every effort is made to ensure the information, data and illustrations are correct at the time of publication, Keymat Technology Ltd. are not
responsible for any errors or omissions contained within this document.
REAR VIEW with Storm 420 Series Encoder fitted
from keypad
Keypad
Encoder , configuration switch set
Panel Fixing prepared
+5V regulated supply
RS 232 cable with 6 way Molex KK socket
13 way ribbon cable keypad to encoder if encoder is to be remote
Polarising pins fitted to encoder
KEYPAD FRONT VIEW
Column1
Column1
Column1
Column1
Row 1
Row 2
Row 3
Row 4
Installation Checklist - Keypad plus RS232
Column2
Column2
Column2
Column2
Row 1
Row 2
Row 3
Row 4
Column3
Column3
Column3
Column3
Row 2
Row 3
Row 4
Row1
Column 4
Column 4
Column 4
Column 4
Row 2
Row 3
Row 4
Row1
6000 Series Application/Engineering Manual Version 1.01 Feb 2004 Page 7 of 16
Application / Engineering Manual
PINS
PIN NUMBER 13 12 11 10 9 8 7 6 5
ANTI-TAMPER CIRCUIT
CONTACT
OPERATING VOLTAGE
OPERATING CURRENT
CIRCUIT RESISTANCE
(normally closed)
6000 Series keypad for public environments
PIN
10
11
12
13
1
2
3
4
5
6
7
8
9
KEYPAD REAR VIEW
CONTACT CONNECTIONS
● ● ● ● ● ● ● ● ● ● ● ● ●
CONTACT MATRIX
(REAR VIEW)
24V dc
10mA
<500
NOT USED
NOT USED
COLUMN
TAMPER
TAMPER
ROW /
C1
C2
C3
C4
R4
R3
NC
R1
R2
(max)
(max)
Ohms
4 3 2 1