585SX4Q25F103SP Honeywell, 585SX4Q25F103SP Datasheet - Page 48

• Manufacturer Part Number: 585SX4Q25F103SP
• Description: Potentiometers 10K Ohm 20% 1/20W 6mm
• Manufacturer: Honeywell
• Type: Potentiometerr
• Series: 585r

Specifications of 585SX4Q25F103SP

• Resistance: 10kohm
• Power Rating: 1/20W
• Tolerance (+ Or -): 20%
• Number Of Turns: 1Turn
• Technology: Carbon Film
• Mounting Style: Panel
• Termination Style: Pin
• Operating Temp Range: -55C to 120C
• Failure Rate: Not Required
• Shaft Diameter (mm): 6mm
• Product Diameter (mm): Not Requiredmm
• Product Length (mm): 19.5mm
• Product Height (mm): 11.35mm
• Product Depth (mm): 9.5mm
• Tolerance: 20 %
• Taper: Linear
• Element Type: Carbon
• Shaft Type: Flatted / D
• Shaft Length: 19.05 mm
• Shaft Diameter: 6 mm
• Product: Commercial Potentiometer
• Voltage Rating: 50 Volts
• Angle, Mechanical: 300 °
• Application: For manual controls, telecommunications and audio equipment
• Diameter, Shaft: 0.236 "
• Dimensions: 9.5mmL×9.5mmW×5mmH
• Linearity: ±5 %
• Material, Element: Carbon
• Mounting Type: PCB
• Power, Rating: 0.05 W
• Rotational Life: 10000 Cycles
• Shaft Style: Flatted Shaft
• Termination: PC Pins
• Voltage, Operating: 50 VAC
• Lead Free Status / RoHS Status: Compliant

HEAVY DUTY LIMIT SWITCHES
HDLS Series Side rotary actuated switches
Levers: Levers for side rotary types are ordered separately (see pages
69-71 for details)
Approvals:
Operating force (Newton meters, N m/in lb):
Conduit:
Contacts:
Switching options:
46
SPDT Double Break
SPDT
LSA, LSL, LSM, LSM, LSP, LSU
LSH, LSR
Electrical ratings A, B
Electrical rating C
www.honeywell.com/sensing
DPDT Double Break
DPDT
NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
Snap action contacts
0,45 N m max.
0,19 N m max.
½ in - 14 NPT
1.7 in lb max
UL, CSA, CE
4 in lb max.
Silver
Gold
Side rotary, momentary action
The momentary action listings shown are factory
assembled with the head adjusted for both
clockwise (CW) and counterclockwise (CCW)
operation. The shaft of side rotary heads face the
front (label side of switch).
Actuation direction
A simple field adjustment converts switch to
accept actuation from one or both directions. For
ready reference, adjustment instructions are cast
into the internal lid of side rotary heads.
Head orientation
The head may be orientated and locked in any of
four 90° positions.
Momentary action switches can be factory
assembled for operation in one direction only and/
or with the shaft facing the rear or either side.
Contact Honeywell for more information.