552699-1 TE Connectivity, 552699-1 Datasheet - Page 28

• Manufacturer Part Number: 552699-1
• Description: TERM.,AMP-BARREL,0.125,CLEANED
• Manufacturer: TE Connectivity
• Type: Barrel Terminalr

Specifications of 552699-1

• Body Plating: Pre-Tin
• Body Material: Phosphor Bronze
• Gender: F
• Product Depth (mm): 3.17mm
• Product Length (mm): 11.63mm
• Rohs Compliant: YES
• Product Type: Terminal
• Terminal Type: AMP-BARREL Terminals
• Mounting Hole Diameter (mm [in]): 1.55-1.65 [.061-.065]
• Insulation Diameter (mm [in]): 2.20 [.086] Max.
• Proprietary Name: AMP-BARREL
• Wire Range (mm [awg]): 0.08-0.90² [28-18]
• Terminal Size (mm [in]): 3.18 [0.125]
• Wire Cutoff Feature: Without
• Number Of Wires/terminal: 1, 2
• Plating Material: Pre-Tin
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Pcb Thickness, Recommended (mm [in]): 1.57 – 2.39 [0.062 – 0.094]
• Applies To: Printed Circuit Board
• Packaging Method: Loose Piece
• Lead Free Status / RoHS Status: Compliant

28
Product Facts
■
■
■
■
■
■
■
■
■
Technical Documents
Product Specification
108-1081
Application Specification
114-1016
Material and Finish
008 phosphor bronze, Pre-tin plated
Pc Board Thickness — .062 [1.57]
Catalog 82159
Revised 12-07
www.tycoelectronics.com
Eliminates manual
preparation of wires prior to
soldering into pc boards
Low applied cost
Total height above pc board
is less than most other
components
Available for 26-10 AWG,
[0.15-5.5 mm
Terminal locking lance
holds wire in pc board for
flow soldering
Design allows both wire and
terminal to be soldered and
assures proper solder flow
Insulation support provides
strain relief for wire and
protection of solder joint
Type A terminals will provide
both a positive board stop
and positive insulation stop
Type E terminal offers
minimum below pc board
length
2
]
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Printed Circuit Board Terminals and Disconnects
Miniature AMP-IN Terminals
The miniature AMP-IN
Terminal is designed not as
an electrical terminal but as
a mechanical holding device
to enhance soldering of
hookup wires to printed circuit
boards. The combination of
terminal and application
tooling eliminates costly
manual preparation of
wires prior to soldering,
and positions the wire to
achieve reliable solder
joints. Movement of the
wire during soldering is
restricted, providing for
proper solder flow.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208