DS1110LE-60+ Maxim Integrated Products, DS1110LE-60+ Datasheet - Page 7

• Manufacturer Part Number: DS1110LE-60+
• Description: Delay Lines / Timing Elements
• Manufacturer: Maxim Integrated Products

Specifications of DS1110LE-60+

• Function: Active Tapped Delay Line
• Supply Voltage (min): 2.7 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Supply Voltage (max): 3.6 V
• Package / Case: TSSOP-14
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

between the input and each tap. Each tap is selected
and connected to the counter by a VHF switch-control
unit. All measurements are fully automated, with each
instrument controlled by a central computer over an
IEEE-488 bus.
Each output is loaded with the equivalent of one 450Ω
resistor in parallel with a 15pF capacitor. Delay is mea-
sured at the 1.5V level on the rising and falling edge.
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 7
© 2002 Maxim Integrated Products
Table 2. Test Conditions
Note: Above conditions are for test only and do not restrict the
operation of the device under other data sheet conditions.
Ambient Temperature
Supply Voltage (V
Input Pulse
Source Impedance
Rise and Fall Time
Pulse Width
Period
INPUT
CC
)
+25°C ±3°C
3.3V ±0.1V
High = 3.0V ±0.1V
Low = 0.0V ±0.1V
50Ω max
2ns max
500ns (1µs for - 500ns)
1µs (2µs for - 500ns)
CONDITION
Printed USA
Output
3V 10-Tap Silicon Delay Line
For the latest package outline information, go to www.maxim-ic.
com/packages.
TRANSISTOR COUNT: 6813
is a registered trademark of Maxim Integrated Products.
Package Information
Chip Information