GRM216R71H472KA01D Murata Electronics, GRM216R71H472KA01D Datasheet - Page 206

• Manufacturer Part Number: GRM216R71H472KA01D
• Description: Cap Ceramic 0.0047uF 50VDC X7R 10% SMD 0805 Paper T/R
• Manufacturer: Murata Electronics
• Type: Flatr

Specifications of GRM216R71H472KA01D

• Package/case: 0805
• Mounting: Surface Mount
• Capacitance Value: 0.0047 uF
• Dielectric: X7R
• Voltage: 50 Vdc
• Product Length: 2 mm
• Product Height: 0.6 mm
• Product Depth: 1.25 mm
• Tolerance: 10 %

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
(4) Taping Method
q Tapes for capacitors are wound clockwise. The
w Part of the leader and part of the empty tape should be
e The top tape or cover tape and base tape are not
r Missing capacitors number within 0.1% of the number
t The top tape or cover tape and bottom tape should not
y Cumulative tolerance of sprocket holes, 10 pitches:
u Peeling off force: 0.1 to 0.6N in the direction shown at
Continued from the preceding page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sprocket holes are to the right as the tape is pulled
toward the user.
attached to the end of the tape as shown at right.
attached at the end of the tape for a minimum of 5
pitches.
per reel or 1 pc, whichever is greater, and are not
continuous.
protrude beyond the edges of the tape and should not
cover sprocket holes.
T0.3mm.
right.
Vacant section
160 min.
Direction of feed
Chip mounting unit Vacant section
(Top Tape or Cover Tape alone)
190 min.
Top Tape or Cover Tape
Base Tape
Package
210 min.
(in mm)
205
C02E.pdf
10.12.20