219-2-1-65F-4-5-5 AIRPAX, 219-2-1-65F-4-5-5 Datasheet - Page 6

• Manufacturer Part Number: 219-2-1-65F-4-5-5
• Description: Circuit Breaker Magnetic Circuit Protectors 2Pole 5A 240VAC 4-Pin
• Manufacturer: AIRPAX
• Type: Magnetic Circuit Protectorsr

Specifications of 219-2-1-65F-4-5-5

• Current Rating: 5 A
• Voltage Rating: 240 Vac
• Number Of Poles: 2

169
209/219/229 MULTI-POLE CIRCUIT PROTECTORS
Common-Trip Construction
All multi-pole protectors contain an internal trip bar which
opens all poles in the event of an overload in any pole.
Handles are ganged externally for simultaneous actuation.
Individual poles may differ in ratings, delays and
configurations, providing an almost limitless number of
combinations.
Multi-pole protectors (up to 6 poles) easily satisfy special
modern day circuitry. Series, shunt, relay and auxiliary switch
construction add to the versatility of design engineering.
Airpax’s sales engineering force is ready to assist in proper
unit selection, both for equipment protection and economical
design.
[69.85]
2.750
Front Connected Solderless Connector
(Back Mounted)
10 - 32 or 1/4 - 20 Screw Terminals
[34.93]
1.375
209/219/229/249/279 Series - 209/219/229 Multi-Pole
(52.63)
MAX.
2.072
4X 6-32 MTG. INSERT
.160 MIN. SCREW DEPTH
[4.06]
.310 MAX. SCREW DEPTH
[7.87]
3.0 MM ISO THD. OPTIONAL
[9.91]
.390
[14.27]
.562
[13.46]
.530
[57.15]
2.250
[28.58]
1.125
[17.78]
MAX.
.700
+.015
+0.38
-0.13
-.005
[5.59]
.220
[66.29]
2.610
[30.99]
1.220
Slotted Mounting Bracket
terminal codes -2, -3, -5, -7, -3M,
-5M, -7M
Three Phase, Four Pole Includes Control Protector
Remote shutdown of equipment is sometimes necessary or
desirable in today’s sophisticated equipment. The 219 four
pole assembly fills this need for three phase operation. Three
of the four poles are designed for the circuit’s proper
operating current and over-current protection. The fourth
pole may be designed for instantaneous tripping by logic
circuitry, interlocks or from a manual remote site or control.
The control power required would be quite low, with voltages
from 5 to 125Vdc, or 5 to 240Vac available. The fourth pole
construction is optional. It may be either series, shunt or
relay, depending on the application required. When
specifying, both the minimum trip voltage and Hz are required.
Factory consultation is readily available.
SCALE: 3/1
[54.76]
2.156
.125
[3.18]
[120.65]
[12.32]
4.750
.485
[147.32]
5.800
[60.32]
2.375
[5.59]
.220
[123.04]
4.844
Short Mounting Bracket
terminal codes -2C, -3C, -5C, -7C
[26.06]
1.026
SCALE: 3/1
http://airpax.sensata.com/
2X MTG. SLOT
CLEARANCE FOR
8-32 SCREW
[5.08]
[3.68]
.200
.145
See available
mounting brackets
below