TC1410NEPA Microchip Technology, TC1410NEPA Datasheet - Page 7

• Manufacturer Part Number: TC1410NEPA
• Description: MOSFET DRVR 0.5A 2-OUT Lo Side Non-Inv 8-Pin PDIP Tube
• Manufacturer: Microchip Technology
• Type: Microcontrollerr

Specifications of TC1410NEPA

• Package: 8PDIP
• Driver Configuration: Non-Inverting
• Driver Type: Low Side
• Peak Output Current: 0.5(Typ) A
• Input Logic Compatibility: CMOS|TTL
• Number Of Outputs: 2
• Output Resistance: 16 Ohm
• Maximum Rise Time: 35 ns
• Maximum Power Dissipation: 730 mW
• Maximum Supply Current: 1 mA
• Operating Temperature: -40 to 85 °C
• Configuration: Low-Side
• Input Type: Non-Inverting
• Delay Time: 30ns
• Current - Peak: 500mA
• Number Of Configurations: 1
• Voltage - Supply: 4.5 V ~ 16 V
• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• Rise Time: 35 ns
• Fall Time: 35 ns
• Supply Voltage (min): 4.5 V
• Supply Current: 1 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Number Of Drivers: 2
• Device Type: MOSFET
• Input Delay: 30ns
• Output Delay: 30ns
• Supply Voltage Range: 4.5V To 16V
• Driver Case Style: DIP
• No. Of Pins: 8
• Rohs Compliant: Yes
• Module Configuration: Low Side
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• High Side Voltage - Max (bootstrap): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3.0
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1:
3.1
The V
and is rated for 4.5V to 16V with respect to the ground
pin. The V
a local ceramic capacitor. The value of the capacitor
should be chosen based on the capacitive load that is
being driven. A value of 1.0 µF is suggested.
3.2
The MOSFET driver input is a high-impedance,
TTL/CMOS-compatible input. The input also has
300 mV of hysteresis between the high and low
thresholds that prevents output glitching even when the
rise and fall time of the input signal is very slow.
Pin No.
2003 Microchip Technology Inc.
1
2
3
4
5
6
7
8
DD
PIN DESCRIPTIONS
Supply Input (V
input is the bias supply for the MOSFET driver
Control Input (INPUT)
OUTPUT
OUTPUT
DD
Symbol
INPUT
GND
GND
V
V
NC
input should be bypassed to ground with
DD
DD
PIN FUNCTION TABLE
Supply input, 4.5V to 16V
Control input
No connection
Ground
Ground
CMOS push-pull output, common
to pin 7
CMOS push-pull output, common
to pin 6
Supply input, 4.5V to 16V
DD
Description
)
3.3
The MOSFET driver output is a low-impedance,
CMOS, push-pull style output, capable of driving a
capacitive load with 0.5 A peak currents.
3.4
The ground pins are the return path for the bias current
and for the high peak currents that discharge the load
capacitor. The ground pins should be tied into a ground
plane or have very short traces to the bias supply
source return.
CMOS Push-Pull Output
(OUTPUT)
Ground
TC1410/TC1410N
DS21389C-page 7