FLAVUS-GSM-REFERENCE-BOARD Antenova, FLAVUS-GSM-REFERENCE-BOARD Datasheet
FLAVUS-GSM-REFERENCE-BOARD
Related parts for FLAVUS-GSM-REFERENCE-BOARD
FLAVUS-GSM-REFERENCE-BOARD Summary of contents
Page 1
... The antenna is intended for snap-in assembly and is supplied in three different clip lengths suitable for attaching to different thicknesses of PCB. Flavus uses a ground plane in order to radiate efficiently, but the ground plane must not be present underneath the antenna itself. The antenna is used in conjunction with a matching circuit that can be optimized for the specific frequency bands that are required ...
Page 2
... All data measured on Antenova’s reference board, -1.6dBi part number B5812-U1 70% Data given for the 824MHz-960MHz and 1710MHz- -6dB 2170MHz frequency ranges 3:1 Flavus GSM Snap-In Antenna Part No. B5812-xx 3 clip length versions to accommodate different PCB thicknesses Conditions Product Specification AE020033-H 2 ...
Page 3
... Electrical performance 7-1 Return Loss 7-2 VSWR Integrated Antenna and RF Solutions Flavus GSM Snap-In Antenna Part No. B5812-xx Product Specification AE020033-H 3 ...
Page 4
... XY plane Patterns show combined polarisations measured on reference Integrated Antenna and RF Solutions X 0 deg 180 90 deg deg 180 deg ZY plane board B5812-U1. 3D Pattern measured at 892MHz Flavus GSM Snap-In Antenna Part No. B5812- deg 90 270 deg deg 180 deg XZ plane Product Specification AE020033-H 270 ...
Page 5
... XY plane Patterns show combined polarisations measured on reference board B5812-U1. 3D Pattern measured at 1894MHz Integrated Antenna and RF Solutions X 0 deg 180 90 deg deg 180 deg ZY plane Flavus GSM Snap-In Antenna Part No. B5812- deg 90 270 deg deg 180 deg XZ plane Product Specification AE020033-H 270 ...
Page 6
... Antenna dimensions Length Width Width Width 27.3+/-0.2 7.9+/-0.2 9.6+/-0.2 8.5 +/-0.2 * Flavus is available in three clip lengths to fit boards of 0.8mm, 1.0mm or 1.6mm thickness Integrated Antenna and RF Solutions Height Height Feed 3.45+/-0.1 3.85+/-0.1 11.85+/-0.2 Flavus GSM Snap-In Antenna Part No ...
Page 7
... Flavus model used. 10 Electrical interface 10-1 Transmission lines The antenna should be connected using an RF transmission line. • All transmission lines should be designed to have a characteristic impedance of 50 Ω • The length of the transmission lines should be kept to a minimum • ...
Page 8
... Note: The component values for the matching circuit will vary depending on the size of the PCB and surrounding components. The impedance of the antenna should be measured before selecting suitable matching components. Antenova offers a matching service on request. Contact info@antenova.com Integrated Antenna and RF Solutions Flavus GSM Snap-In Antenna for further information. Part No. B5812-xx 8 Product Specification AE020033-H ...
Page 9
... Antenna placement Flavus must be fitted to the device so that power from the antenna can radiate into free space. Antenova recommends fitting the antenna close to the corner of the PCB with few components or metal objects nearby. Ground can be placed at the side of the antenna closest to the feed, but the remaining space around the antenna, including directly above and below should be free from components or conducting objects ...
Page 10
... Reference board The reference board has been designed for evaluation purposes of Flavus GSM and it includes a SMA female connector. The reference board is available with Flavus tuned to cover 5 bands: GSM850/900/1800/1900 and WCDMA , Part number : B5812-U1. To order a reference board contact Integrated Antenna and RF Solutions Dimensions in mm info@antenova ...
Page 11
... Shelf Life 12 Months Storage place Away from corrosive gas and direct sunlight 12-2 Packaging information The antennas are delivered in trays of 140 pieces packaged in boxes of 980 pieces. Integrated Antenna and RF Solutions Flavus GSM Snap-In Antenna Part No. B5812-xx Quantity Number Tray of Trays Quantity ...
Page 12
... Box label information Integrated Antenna and RF Solutions Flavus GSM Snap-In Antenna Dimensions in mm Part No. B5812-xx 12 Product Specification AE020033-H ...
Page 13
... Integrated Antenna and RF Solutions www.antenova.com +1 (847) 551 9710 +1 (847) 551 9719 info@antenova.com ® Flavus GSM Snap-In Antenna Part No. B5812-xx Asia Headquarters Antenova Asia Ltd. 4F, No. 324, Sec. 1, Nei-Hu Road Nei-Hu District Taipei 11493 Taiwan, ROC ...