DEMO9S08JM16 Freescale, DEMO9S08JM16 Datasheet - Page 4

• Manufacturer Part Number: DEMO9S08JM16
• Manufacturer: Freescale

Specifications of DEMO9S08JM16

• Lead Free Status / RoHS Status: Compliant

Connect Board to Computer
USB driver installation is a one-time
required step, to be completed after
CodeWarrior installation.
1. Remove DEMOJM base board and
2. Plug in the MC9S08JM16 daughter card to
3. Connect provided A to B gray USB cable from
4. Operating system will recognize your board
5. Follow on-screen instructions until all USB
MC9S08JM16 daughter card from
anti-static bags.
DEMOJM base board aligning pin 1 arrows.
a free USB port on your computer to the USB
connector on the board.
as new hardware and will prompt you to
install the USB drivers. Choose recommended
option to install the software automatically.
USB drivers for your board were pre-loaded in
CodeWarrior installation.
driver installations are complete. The green
USB LED on-board should illuminate.
STEP
4
Test Board by Running
Quick Start Application
Now that you have successfully
completed the software and hardware
setup, test your board by running the
Quick Start Application pre-loaded in the
microcontroller’s on-chip flash memory.
The programmed application is the
HID class software included in the
complimentary USB-LITE stack by CMX
for MC9S08JM16. The HID class software
includes several examples (mouse,
keyboard, etc.) with the default example
turning your board and making it a simple
HID mouse by exercising the JM16 on-chip
USB 2.0 full speed device controller and
transceiver. The example takes control of
your computer’s mouse cursor and moves
it continuously in a back and forth motion
following USB enumeration.
1. Turn the SYSTEM POWER switch to the “on”
2. Connect provided A to mini-B black USB cable
3. Your computer will recognize the MC9S08JM16
4. Now that your board is functional, try out the
position. The red POWER LED will illuminate
and application will start.
from a free USB port on your computer to the
mini-AB USB connector on the board.
as an HID mouse device and begin installation
(no user interaction needed). When hardware
installation is complete, the MC9S08JM16 will
control your mouse cursor by moving it back
and forth.
labs discussed in the DEMO9S08JM16 Labs
document (DEMO9S08JM16LAB) included in
the “Training” section of the DVD. These labs
will guide you step by step through the all the
HID and CDC class examples included in the
complimentary USB-LITE stack by CMX
for MC9S08JM16.
STEP
5