CZB2BFTTE260P KOA Speer Electronics, CZB2BFTTE260P Datasheet - Page 13

• Manufacturer Part Number: CZB2BFTTE260P
• Description: EMI/RFI Suppressors & Ferrites 1206 26ohm 25%
• Manufacturer: KOA Speer Electronics

Specifications of CZB2BFTTE260P

• Test Frequency: 100 MHz
• Product: Chip Ferrite Beads
• Tolerance: 25 %
• Maximum Dc Current: 600 mAmps
• Maximum Dc Resistance: 0.1 Ohms
• Operating Temperature Range: - 55 C to + 125 C
• Package / Case: 1206 (3216 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

KOA SPEER ELECTRONICS, INC.
5. Characteristics (continued)
Bolivar Drive
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Item
Bending Strength
Mechanical Shock
Vibration
Thermal Shock
Load Humidity
Life Test
■
P.O. Box 547
Requirement
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value before test
±10%
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value before test
±10%
Impedance: Relative to initial value ±10%
Appearance: There shall be no physical or
mechanical damage.
Impedance: Relative to initial value ±20%.
DCR: The DCR shall not exceed initial specified
value.
Testing of the parts will be made at 0 hours, 250
hours and 500 hours. Before testing the parts
shall be allowed to cool to room temperature for
24 hours.
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value ±15%
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value ±15%
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
■
Bradford, PA 16701
■
USA
■
814-362-5536
Conditions
Board: 90x40x1.6mm
Bend: 1mm
Time: 5 sec
Force: 50G
Time: 11 msec
There shall be 3 shocks in each of 6 directions
(18 shocks total).
Only endurance conditioning by sweeping shall
be made. The entire frequency range from
10-2,000Hz and return to 10Hz in 20
minutes (this shall constitute one cycle).
Amplitude: 1.5mm
The test shall have a 15G peak and shall be
applied for a period of 4 hours (12 cycles)
in each of 3 mutually perpendicular directions
(a total of 36 cycles within a total of 12 hours).
Steps 1 thru 5 constitute one complete cycle
and the test shall consist of a total of 500
cycles.
Temperature: 85°C ±2°C
Relative Humidity: 85%
Time: 1,000 hours total
Apply: 100% rated current
Temperature: 85°C ±2°C
Time: 1,000 hours total
Apply: 100% rated current
■
3-transfer
5-transfer
1-start
2-hold
4-hold
Fax [phone]
Step
Temperature
+105°C ±2°C 30 min ±5 min
-40°C ±2°C
-40°C ±2°C 30 min ±5 min
—
—
■
www.koaspeer.com
0.5 min max.
0.5 min max.
PAGE 13 OF 15
—
Time
SS-219 R15