5745173-2 TE Connectivity, 5745173-2 Datasheet - Page 34

• Manufacturer Part Number: 5745173-2
• Description: Connector Accessories 25 POS D-Sub Backshell/Cable Clamp Kit Die Cast Bright Nickel Over Copper Shell Size 3 Individual
• Manufacturer: TE Connectivity
• Type: Backshell/Cable Clamp Kitr
• Series: AMPLIMITEr

Specifications of 5745173-2

• Operating Temp Range: -55C to 105C
• Product Length (mm): 53.08mm
• Product Depth (mm): 48.76mm
• Product Height (mm): 17.27mm
• D Sub Shell Size: DB
• Connector Body Material: Zinc Alloy
• Cable Exit Angle: 180°
• Connector Shell Size: DB
• Enclosure Material: Zinc Alloy
• Accessory Type: Cable Clamp
• Rohs Compliant: Yes
• Product: Standard Hoods & Connectors
• Number Of Positions / Contacts: 25
• Contact Plating: Nickel over Copper
• Shell Plating: Bright Nickel over Copper
• Shell Size: 3
• Mounting Style: Cable
• Mounting Angle: Straight
• Accessory: Cable Clamp
• Connector Type: Cable Clamp
• Number Of Rows: 2
• Product Type: Backshell/Cable Clamp
• Cable Clamp Type: Two-Piece RFI/EMI Shield
• Grommets: Without
• Thread Size: 4-40
• Shielded: Yes
• Cable Insulation Diameter (mm [in]): 12.19 [0.480]
• Number Of Positions: 25
• Cable Clamp Material: Die Cast
• Shield Plating: Bright Nickel over Copper
• Long Turnable Jack Screw Part No.: 747784-3
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Individual Kit
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Compliant

Product Facts
■
■
■
■
■
■
■
■
■
■
■
■
■
Technical Documents:
Instruction Sheets
408-7777 Manual Arbor Tool
Note: Instruction Sheets for
Tyco Electronics Tooling are packaged
with the tooling. For additional informa-
tion call the Tooling Assistance Center:
1-800-722-1111.
Catalog 82068
Revised 1-08
www.tycoelectronics.com
Low applied costs
Automatic termination
of jacketed cable
Automatic continuity check
and shorts test
Single- or double-ended
assemblies
Microprocessor controlled
with touch input screen
Stored program capability
Selective termination of
connector positions
Rapid tooling changeover
for different connector types
Handles a variety of
Tyco Electronics insulation-
displacement connectors
Terminates both multicolor
and single-color wires
Remote programming capa-
bility
Straight or right-angle wire
dress
Control Module
852423-1 120 VAC
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPLIMITE Subminiature D Connectors
HDE-20 Application Tooling
Note: All part numbers are RoHS compliant.
Manual
Arbor Tool
Wire O.D. .040 [1.02] and smaller—No. 543157-1 (tool mount),
Control Module
Wire O.D. .041-.060 [1.04-1.52]—No. 543157-1 (tool mount),
No. 852423-1
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
543426-1 (termination tool)
543426-2 (termination tool)
Arbor Tool No. 91085-2
Applicators:
(Continued)
CHAMPOMATOR
No. 354786-4
2.5 Machine
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
CHAMPOMATOR 3A
Terminating Machine
This machine is the
high-productivity way to
terminate multiconductor,
jacketed cable with a variety of
Tyco Electronics connectors
having insulation displacement
contacts. It automatically sorts
the wires, and terminates
them in a programmed
sequence. The sequence
may use all or some of the
connector contacts, such
as for various RS-232 wiring
patterns.
All cable assemblies are tested
for continuity and shorts.
The machine is micro-
processor controlled, and
programmed by a touch input
screen. The easy programming
simplifies the process and
reduces training require ments.
The machine’s internal storage
capability can retain up to 50
cable assemblies, which can
be easily retrieved by number
or name. Produc tion monitoring
and diag nostics can also be
accessed through the touch
screen.
Contact Tyco Electronics for
the tooling required for your
specific applications.
CHAMPOMATOR 2.5
Terminating Machine
This is a compact, semi-
automatic bench machine. It
is microprocessor controlled,
and programmed using a
membrane switch keyboard.
The potential machine rate is
one pair of wires per second.
Contact Tyco Electronics for
the tooling required for your
specific applications.
The CHAMPOMATOR Model
2.5 Bench Terminating
Machine—Part No. 354786-4
is used in conjunction with
Control Module—Part No.
852423-1.
Contact Tyco Electronics for
application specific
requirements.
Manual Arbor Tool
The arbor tool with applicator
is used to terminate jacketed
cable. Wires are neatly routed
and trimmed to length with
the cable jacket close to the
connector. 400 to 800 termi -
nated wires per hour are
typical.
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
123