5745854-1 TE Connectivity, 5745854-1 Datasheet - Page 13

• Manufacturer Part Number: 5745854-1
• Description: Connector Accessories 9 POS D-Sub Backshell/Cable Clamp Thermoplastic Bright Nickel Over Copper Finish Individual Kit
• Manufacturer: TE Connectivity
• Type: Backshell/Cable Clampr
• Series: AMPLIMITEr

Specifications of 5745854-1

• Product Length (mm): 30.86mm
• Product Depth (mm): 48.51mm
• Product Height (mm): 15.74mm
• D Sub Shell Size: DE
• Connector Body Material: Thermoplastic
• Cable Exit Angle: 180°
• Connector Shell Size: DE
• Enclosure Material: Plastic
• Accessory Type: Shielded Cable Clamp Kit
• Rohs Compliant: Yes
• Height: 0.57 "
• Length: 1.91 "
• Protection Class: Clamp, Cable
• Size, Thread: #4-40
• Width: 1.215 "
• Product Type: Backshell/Cable Clamp
• Cable Clamp Type: Two-Piece RFI/EMI Shield
• Shell Size: 1
• Grommets: Without
• Thread Size: 4-40
• Shielded: Yes
• Cable Insulation Diameter (mm [in]): 9.40 [0.370]
• Number Of Positions: 9
• Cable Clamp Material: Metal Plated Thermoplastic
• Shield Plating: Bright Nickel over Copper
• Long Turnable Jack Screw Part No.: 747784-3
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Individual Kit
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Compliant

102
HDP-20 contacts may be
applied by a variety of hand
tools and machines. For
low production runs, repairs
and prototype work, we
offer either our premium
CERTI-CRIMP Hand Tool
or our commercial
PRO-CRIMPER II Hand Tool.
For medium-volume
production, you have the
choice of our AMP-O-LECTRIC
Model “G” Terminating
Machine, our new Model
“M” Terminating Machine, or
our AMP-O-MATIC Model II
Stripper-Crimper Machine.
The Stripper-Crimper is typi-
cally used for terminating
the wires of jacketed cable.
All three machines can be
bench mounted.
For production requirements
ranging from non-stop high
volumes to countless series
of short runs, our popular
AMPOMATOR CLS IV+ fully-
automated lead-making
machine is an ideal choice.
For further information
about these or other
Tyco Electronics hand tools
and machines, call the
Tyco Electronics Tooling
Assistance Center at
1-800-722-1111.
Catalog 82068
Revised 1-08
www.tycoelectronics.com
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPLIMITE Subminiature D Connectors
HDP-20 Application Tooling
Note: All part numbers are RoHS compliant.
This versatile machine
now incorporates two
AMP-O-LECTRIC Model “G”
Terminating Units. Basically,
it produces single-wire
leads in lengths from 1.62
[41.2] to 1000 [25 400]. It
measures, cuts, strips and
terminates wire sizes from
26 to 10 AWG [0.12 to 6 mm
stranded and 26 to
16 AWG [0.12 to 1.4 mm
solid. Production rates
range up to 4800 leads per
hour for 3 [76.2] lengths.
The machine is micropro-
cessor controlled, and pro -
grammed and operated with
AMPOMATOR CLS IV+ Lead-Making Machine
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
2
]
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
2
]
an easy-to-follow, menu-dri-
ven touchscreen. It can
retain data for up to 200
lead assemblies. Off-line
programming is also pos-
sible with optional software
OffLine-Plus for Windows
95, Part No. 189263-2.
Air requirement is 90 psi
[6.21] bar minimum at
15 scfm [0.0071 m
requirement is single-phase
220 VAC, 50 or 60 Hz, 25 A.
For further information
request Catalog 124324.
3
/s]. Power
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208