5223513-3 TE Connectivity, 5223513-3 Datasheet

Conn Backplane PIN 96 POS 2mm Press Fit RA Thru-Hole

5223513-3

Manufacturer Part Number
5223513-3
Description
Conn Backplane PIN 96 POS 2mm Press Fit RA Thru-Hole
Manufacturer
TE Connectivity
Type
Backplaner
Datasheets
1.536607-1.pdf (8 pages)
2.5223513-3.pdf (1 pages)

Specifications of 5223513-3

Pitch
2 mm
Number Of Rows
4
Number Of Contacts
96
Termination Method
Press Fit
Mounting
Through Hole
Contact Plating
Gold Over Palladium Nickel
Rohs Compliant
YES
Product Type
Connector
Connector Type
Header
Pcb Mounting Orientation
Right Angle
Post Type
Press-Fit
Module Type
Signal
Mating Post Length (mm [in])
5.00 [0.197]
Press-fit Post Style
Compliant Pin
Pin Header Width (mm [in])
16.00 [0.622]
Voltage Rating (vac)
30
Termination Post Length (mm [in])
2.73 [0.107]
Number Of Signal Positions
96
Sequencing
No
Post Plating
Tin
Centerline, Matrix (mm [in])
2.00 x 2.00 [.079 x .079]
Contact Type
Pin
Contact Base Material
Phosphor Bronze
Contact Plating, Mating Area, Material
Gold Flash over Palladium Nickel
Connector Style
Plug
Housing Material
Liquid Crystal Polymer (LCP)
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
Rohs/elv Compliance History
Always was RoHS compliant
Applies To
Printed Circuit Board
Application
Free-Board
1.
1.1.
1.2.
2.
2.1.
3.
3.1.
3.2.
©2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
SCOPE
Content
This specification covers performance, tests and quality requirements for the Z-PACK* 2mm FB
connector system. This connector system is a backplane bus system which interconnects printed circuit
boards using pin and receptacle connectors. Connectors employ a four row 2mm centerline
configuration. Being through hole devices, pin and receptacle contacts have either solder or press fit
leads.
Qualification
When tests are performed on the subject product line, procedures specified in 109 Series Test
Specifications shall be used. All inspections shall be performed using the applicable inspection plan and
product drawing.
APPLICABLE DOCUMENTS
The following documents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the document applies. In the event of conflict between
requirements of this specification and the product drawing, the product drawing shall take precedence.
In the event of conflict between requirements of this specification and referenced documents, this
specification shall take precedence.
TE Connectivity (TE) Documents
!
!
!
REQUIREMENTS
Design and Construction
Product shall be of design, construction and physical dimensions specified on the applicable product
drawing.
Materials
!
!
109-1: General Requirements for Test Specifications
109 Series: Test Specifications as indicated in Figure 1
501-334: Qualification Test Report
Contact:
•
•
•
Housing: High temperature thermoplastic, liquid crystal polymer
Signal/power pin: Phosphor bronze, gold over palladium nickel over nickel plating
Signal receptacle: Copper nickel zinc, gold over palladium nickel over nickel plating
Power receptacle: Beryllium copper, gold over palladium nickel over nickel plating
| Indicates change
*Trademark
Product
Specification
Connector, Z-PACK*, 2 mm FB, Signal and Power
For latest revision, visit our website at www.te.com/documents.
For Regional Customer Service, visit our website at www.te.com
Other products, logos, and company names might be trademarks of their respective owners.
108-1441
11Mar11 Rev C
1 of 8
LOC B

Related parts for 5223513-3

Image
Part Number
Description
Manufacturer
Datasheet
Request R
TE-PRINTER-PERFORATOR
Part Number:
TE-PRINTER-PERFORATOR
Description:
Printers THERMAL PRINTER HS-SLEEVE MARKER
Manufacturer:
TE Connectivity
120658-2
Part Number:
120658-2
Description:
Manufacturer:
TE Connectivity
Datasheet:
120658-2.pdf (1 page)
120661-1
Part Number:
120661-1
Description:
Manufacturer:
TE Connectivity
Datasheet:
120661-1.pdf (1 page)
120661-2
Part Number:
120661-2
Description:
Manufacturer:
TE Connectivity
Datasheet:
120661-1.pdf (1 page)
120662-1
Part Number:
120662-1
Description:
Manufacturer:
TE Connectivity
Datasheet:
120662-1.pdf (1 page)
120732-1
Part Number:
120732-1
Description:
High Speed / Modular Connectors 30P HEADER ASSY
Manufacturer:
TE Connectivity
Datasheet:
120670-1.pdf (7 pages)
120788-1
Part Number:
120788-1
Description:
High Speed / Modular Connectors REC 6X005P R/A LT B-PLANE HS3
Manufacturer:
TE Connectivity
Datasheet:
120670-1.pdf (7 pages)
280388-2
Part Number:
280388-2
Description:
Manufacturer:
TE Connectivity
Datasheet:
280388-2.pdf (1 page)
1-826632-7
Part Number:
1-826632-7
Description:
Manufacturer:
TE Connectivity
Datasheet:
1-826632-1.pdf (1 page)
280375-1
Part Number:
280375-1
Description:
Manufacturer:
TE Connectivity
Datasheet:
280370-3.pdf (1 page)
3-826947-6
Part Number:
3-826947-6
Description:
Manufacturer:
TE Connectivity
Datasheet:
1-826947-1.pdf (1 page)
5-826953-0
Part Number:
5-826953-0
Description:
Manufacturer:
TE Connectivity
Datasheet:
1-826953-9.pdf (1 page)
8-1734774-1
Part Number:
8-1734774-1
Description:
Manufacturer:
TE Connectivity
Datasheet:
1-1734774-0.pdf (4 pages)
825437-7
Part Number:
825437-7
Description:
Manufacturer:
TE Connectivity
Datasheet:
1-825437-2.pdf (1 page)
826467-7
Part Number:
826467-7
Description:
Manufacturer:
TE Connectivity
Datasheet:
1-826467-0.pdf (2 pages)

5223513-3 Summary of contents

Page 1

... Power receptacle: Beryllium copper, gold over palladium nickel over nickel plating ! Housing: High temperature thermoplastic, liquid crystal polymer ©2011 Tyco Electronics Corporation, | Indicates change a TE Connectivity Ltd. Company *Trademark All Rights Reserved TE logo is a trademark. For latest revision, visit our website at www.te.com/documents. ...

Page 2

Ratings ! Voltage: 30 volts alternating current ! Current: • Power: 3 amperes per contact • Signal: See Figure 5 for applicable current carrying capability ! Temperature: -55 to 125° Maximum Initial Contact Resistance: See Figure 1 ...

Page 3

Test Description Vibration, sinusoidal. Physical shock. Durability. Mating force. Unmating force. Thermal shock. Humidity-temperature cycling. Rev C Requirement MECHANICAL No discontinuities of 1 microsecond or longer duration. See Note. No discontinuities of 1 microsecond or longer duration. See Note. See ...

Page 4

Test Description Temperature life. Mixed flowing gas. Shall meet visual requirements, show no physical damage and shall meet requirements of NOTE additional tests as specified in Test Sequence in Figure 3. Rev C Requirement See Note. See Note. Figure 2 ...

Page 5

Product Qualification and Requalification Test Sequence Test or Examination Examination of product Termination resistance Insulation resistance Dielectric withstanding voltage Temperature rise vs current Vibration Physical shock Durability Mating force Unmating force Thermal shock Humidity-temperature cycling Temperature life Mixed flowing ...

Page 6

Power connectors. Power connector housings and contacts shall be prepared in accordance with applicable Instruction Sheets and shall be selected at random from current production. All test groups shall consist of 5 connectors each of the largest available size. ...

Page 7

To determine acceptable current carrying capacity for percentage connector loading, use the NOTE Multiplication Factor (F) from the above chart and multiply it times Base Rated Current for a single circuit at maximum ambient operating temperature as shown in Figure ...

Page 8

Rev C Figure 6 Vibration & Physical Shock Mounting Fixture 108-1441 ...

Related keywords