5-102692-1 TE Connectivity, 5-102692-1 Datasheet - Page 27

• Manufacturer Part Number: 5-102692-1
• Description: Conn Shrouded Header HDR 12 POS 2.54mm Solder ST Thru-Hole
• Manufacturer: TE Connectivity
• Type: Shrouded Headerr

Specifications of 5-102692-1

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 12
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Connector Type: Header
• Pcb Mount Retention: Without
• Pcb Mounting Orientation: Vertical
• Termination Method To Pc Board: Through Hole - Solder
• Post Size (mm [in]): 0.64 [.025]
• Contact - Rated Current (a): 3
• Voltage (vac): 250
• Dielectric Withstanding Voltage (v): 750
• Termination Resistance (m?): 12
• Insulation Resistance (m?): 1,000
• Termination Post Length (mm [in]): 4.57 [0.180]
• Termination End Plating: Tin over Nickel
• Header Type: Standard
• Centerline (mm [in]): 2.54 [0.100]
• Number Of Positions: 12
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Mating Retention: Without
• Contact Protection: With
• Contact Protection Type: Shrouded
• Assembly Process Feature: None
• Contact Type: Pin
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Shape: Square
• Contact Base Material: Phosphor Bronze
• Connector Style: Plug
• Mating Alignment: With
• Mating Alignment Type: Guide Pin
• Housing Material: Thermoplastic - GF
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Approved Standards: UL E28476, CSA LE7189
• Pcb Thickness, Recommended (mm [in]): 1.40 [0.055]
• Temperature Range (°c): -65 – +105
• Contact Transmits (typical Application): Signal (Data)

Wire Crimp Contacts
with Insulation Support
Material and Finish
Contact Spring — Stainless steel
Pating A — Selectively plated
.000050 [0.00127] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Pating B — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Pating C — .000100-.000200
[0.00254-0.00508] bright tin over
.000050 [0.00127] nickel on entire
contact
*For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
Notes: 1. These contacts must be crimped in accordance with Tyco Electronics Specification No. 114-25006 in order to function properly in a connector housing.
Related Product Data
Housings Used With —
pages 208, 209
Application Tooling — page 272
Technical Documents
pages 277, 278
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
30-28
26-22
AWG
20
2. Extraction Tool No. 91084-1 is used for removing individual contacts from connector housings and for detaching contacts from mating posts.
Wire Size
Range
Extraction Tool
No. 91084-1
0.05-0.09
0.12-0.4
0.5-0.6
[mm
2
]
—
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
.029-.039 [0.74-0.99]
.038-.062 [0.97-1.57]
.038-.062 [0.97-1.57]
Range
Dia.
Ins.
AMPMODU Interconnection System
Locking Clip Contacts
Wire Harnessing
If necessary, wires can be
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
be free to float within the
connector housings to
allow proper extraction.
Therefore, harnessing
hardware or the use of
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing.
For more information
request Insulation and
Bundling Products Catalog
124132.
Note: All part numbers are RoHS compliant.
.550 [13.97]
.584 [14.83]
.584 [14.83]
Dimension
A
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Spring
Plating B
Plating C
Plating A
Plating B
Plating C
Plating B
Plating C
Finish
Strip Form
5-867052-1
5-87190-2
5-87124-2
867052-2
87190-1
87124-3
87124-1
Body
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Part Nos.
Clamp
Fixed
Cable
Tie
Loose Piece
A
5-87191-2
5-87165-2
87191-1
87165-3
87165-1
—
—
Heavy Duty Miniature
Free-Floating
Unrestricted
AMP-O-LECTRIC
Wires for
Contacts
Applicator for
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Machine*
567310-2
466721-2
679996-2
90295-1
91533-1
90431-1
Hand
Tool
No.
207
5