PIC16F1938-I/MV Microchip Technology, PIC16F1938-I/MV Datasheet - Page 14

• Manufacturer Part Number: PIC16F1938-I/MV
• Description: 28KB Flash, 1KB RAM, 256B EEPROM, LCD, 1.8-5.5V 28 UQFN 4x4x0.5mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1938-I/MV

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 28KB (16K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-UFQFN Exposed Pad
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: MI2C, SPI, EUSART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: DV164035, DV244005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• On-chip Dac: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC16F193X/LF193X/PIC16F194X/LF194X/
REGISTER 3-2:
DS41397B-page 14
bit 13
bit 6
Legend:
R = Readable bit
-n = Value at POR
bit 13
bit 12
bit 11
bit 10-9
bit 8
bit 7
bit 6
bit 5
Note 1:
R/P-1
FCMEN
MCLRE
(4)
R/P-1
(4)
(4)
2:
3:
4:
5:
(4)
Enabling Brown-out Reset does not automatically enable Power-up Timer.
The entire data EEPROM will be erased when the code protection is turned off during an erase.
The entire program memory will be erased when the code protection is turned off.
Unemplemented on PIC16LF190X devices. This bit reads as ‘1’.
For PIC16LF190X only.
FCMEN: Fail-Safe Clock Monitor Enable bit
1 = Fail-Safe Clock Monitor is enabled
0 = Fail-Safe Clock Monitor is disabled
IESO: Internal External Switchover bit
1 = Internal/External Switchover mode is enabled
0 = Internal/External Switchover mode is disabled
CLKOUTEN: Clock Out Enable bit
1 = CLKOUT function is disabled. I/O or oscillator function on RA6/CLKOUT
0 = CLKOUT function is enabled on RA6/CLKOUT
BOREN<1:0>: Brown-out Reset Enable bits
11 = BOR enabled
10 = BOR enabled during operation and disabled in Sleep
01 = BOR controlled by SBOREN bit of the PCON register
00 = BOR disabled
CPD: Data Code Protection bit
1 = Data memory code protection is disabled
0 = Data memory code protection is enabled
CP: Code Protection bit
1 = Program memory code protection is disabled
0 = Program memory code protection is enabled
MCLRE: MCLR/V
If LVP bit = 1:
If LVP bit = 0:
PWRTE: Power-up Timer Enable bit
1 = PWRT disabled
0 = PWRT enabled
R/P-1
PWRTE
This bit is ignored.
1 = MCLR/V
0 = MCLR/V
R/P-1
CONFIGURATION WORD 1
IESO
port pin’s WPU control bit.
(4)
PP
PP
W = Writable bit
‘1’ = Bit is set
PP
CLKOUTEN
pin function is MCLR; Weak pull-up enabled.
pin function is digital input; MCLR internally disabled; Weak pull-up under control of
WDTE1
Pin Function Select bit
R/P-1
R/P-1
(3)
(2)
(1)
BOREN1
WDTE0
R/P-1
R/P-1
(1)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
BOREN0
R/P-1
FOSC2
R/P-1
(4)
 2010 Microchip Technology Inc.
R/P-1
FOSC1
R/P-1
CPD
(4)
FOSC0
R/P-1
R/P-1
CP
bit 7
bit 0