PIC18F66K80-E/PT Microchip Technology, PIC18F66K80-E/PT Datasheet - Page 257

• Manufacturer Part Number: PIC18F66K80-E/PT
• Description: ECAN, 64KB Flash, 4KB RAM, 16 MIPS, 12-bit ADC, CTMU 64 TQFP 10x10x1mm TRAY
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F66K80-E/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: ECAN, I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.6K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 11x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: *
• Processor Series: PIC18F66K80
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 54
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

18.9
The CTMU, along with an internal diode, can be used
to measure the temperature. The ADC can be con-
nected to the internal diode and the CTMU module can
EXAMPLE 18-6:
 2011 Microchip Technology Inc.
// Initialize CTMU
CTMUICON = 0x03;
CTMUCONHbits.CTMUEN = 1;
CTMUCONLbits.EDG1STAT = 1;
// Initialize ADC
ADCON0 = 0xE5;
ADCON1 = 0x00;
ADCON2 = 0xBE;
ADCON0bits.GO = 1;
while(ADCON0bits.G0);
Temp = ADRES;
Note:
Measuring Temperature
CTMU Module
The temperature diode is not calibrated or standardized; the user must calibrate the diode to their application.
ROUTINE FOR TEMPERATURE MEASUREMENT USING INTERNAL DIODE
with
// Enable ADC and connect to Internal diode
//Right Justified
// Start conversion
// Read ADC results (inversely proportional to temperature)
the
Preliminary
PIC18F66K80 FAMILY
source the current to the diode. The ADC reading will
reflect the temperature. With the increase, the ADC
readings will go low. This can be used for low-cost
temperature measurement applications.
DS39977C-page 257