PIC24F16KA304T-I/ML Microchip Technology, PIC24F16KA304T-I/ML Datasheet - Page 161

• Manufacturer Part Number: PIC24F16KA304T-I/ML
• Description: 16KB Flash, 2KB RAM, 512B EEPROM, 16 MIPS, 12-bit ADC, CTMU, XLP 44 QFN 8x8x0.9m
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24F16KA304T-I/ML

• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 16KB (5.5K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-VQFN Exposed Pad
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 15-1:
 2011 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-14
bit 13
bit 12-10
bit 9
bit 8
bit 7
bit 6
bit 5
bit 4
bit 3
Note 1:
ENFLT0
R/W-0
U-0
—
The comparator module used for Fault input varies with the OCx module. OC1 and OC2 use
Comparator 1; OC3 and OC4 use Comparator 2; OC5 uses Comparator 3.
Unimplemented: Read as ‘0’
OCSIDL: Stop Output Compare x in Idle Mode Control bit
1 = Output compare x halts in CPU Idle mode
0 = Output compare x continues to operate in CPU Idle mode
OCTSEL<2:0>: Output Compare x Timer Select bits
111 = System clock
110 = Reserved
101 = Reserved
100 = Timer1
011 = Timer5
010 = Timer4
001 = Timer3
000 = Timer2
ENFLT2: Comparator Fault Input Enable bit
1 = Comparator Fault input is enabled
0 = Comparator Fault input is disabled
ENFLT1: OCFB Fault Input Enable bit
1 = OCFB Fault input is enabled
0 = OCFB Fault input is disabled
ENFLT0: OCFA Fault Input Enable bit
1 = OCFA Fault input is enabled
0 = OCFA Fault input is disabled
OCFLT2: PWM Comparator Fault Condition Status bit
1 = PWM comparator Fault condition has occurred (this is cleared in hardware only)
0 = PWM comparator Fault condition has not occurred (this bit is used only when OCM<2:0> = 111)
OCFLT1: PWM OCFB Fault Input Enable bit
1 = PWM OCFB Fault condition has occurred (this is cleared in hardware only)
0 = PWM OCFB Fault condition has not occurred (this bit is used only when OCM<2:0> = 111)
OCFLT0: PWM OCFA Fault Condition Status bit
1 = PWM OCFA Fault condition has occurred (this is cleared in hardware only)
0 = PWM OCFA Fault condition has not occurred (this bit is used only when OCM<2:0> = 111)
TRIGMODE: Trigger Status Mode Select bit
1 = TRIGSTAT (OCxCON2<6>) is cleared when OCxRS = OCxTMR or in software
0 = TRIGSTAT is only cleared by software
R/W-0, HCS R/W-0, HCS R/W-0, HCS
OCFLT2
U-0
—
OCxCON1: OUTPUT COMPARE x CONTROL REGISTER 1
HCS = Hardware Clearable/Settable bit
W = Writable bit
‘1’ = Bit is set
OCSIDL
OCFLT1
R/W-0
OCTSEL2
OCFLT0
R/W-0
PIC24FV32KA304 FAMILY
(2)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
TRIGMODE
OCTSEL1
R/W-0
R/W-0
(2)
OCTSEL0
OCM2
R/W-0
R/W-0
(1)
x = Bit is unknown
OCM1
ENFLT2
R/W-0
R/W-0
(1)
DS39995B-page 161
OCM0
ENFLT1
R/W-0
R/W-0
(1)
bit 8
bit 0