PIC32MX664F064H-I/MR Microchip Technology, PIC32MX664F064H-I/MR Datasheet - Page 3

• Manufacturer Part Number: PIC32MX664F064H-I/MR
• Description: 64 PINS, 64KB Flash, 32KB RAM, 80 MHz, USB, Ethernet, 4 DMA 64 QFN 9x9x0.9mm TUB
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX664F064H-I/MR

• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: Ethernet, I²C, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN Exposed Pad
• Processor Series: PIC32MX5x
• Core: MIPS32
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 5
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

High-Performance 32-bit RISC CPU:
• MIPS32
• 80 MHz maximum frequency
• 1.56 DMIPS/MHz (Dhrystone 2.1) performance
• Single-cycle multiply and high-performance divide
• MIPS16e
• Two sets of 32 core register files (32-bit) to reduce
• Prefetch Cache module to speed execution from
Microcontroller Features:
• Operating voltage range of 2.3V to 3.6V
• 64K to 512K Flash memory (plus an
• 16K to 128K SRAM memory
• Pin-compatible with most PIC24/dsPIC
• Multiple power management modes
• Multiple interrupt vectors with individually
• Fail-Safe Clock Monitor mode
• Configurable Watchdog Timer with on-chip
Peripheral Features:
• Atomic SET, CLEAR and INVERT operation on
• Up to 8-channels of hardware DMA with automatic
• USB 2.0-compliant full-speed device and
• 10/100 Mbps Ethernet MAC with MII and RMII
• CAN module:
• 3 MHz to 25 MHz crystal oscillator
© 2010 Microchip Technology Inc.
at zero Wait state Flash access
unit
interrupt latency
Flash
additional 12 KB of Boot Flash)
devices
programmable priority
Low-Power RC oscillator for reliable operation
select peripheral registers
data size detection
On-The-Go (OTG) controller:
- Dedicated DMA channels
interface:
- Dedicated DMA channels
- 2.0B Active with DeviceNet™ addressing
- Dedicated DMA channels
support
®
®
M4K
mode for up to 40% smaller code size
High-Performance, USB, CAN and Ethernet
®
32-bit core with 5-stage pipeline
32-bit Flash Microcontrollers
PIC32MX5XX/6XX/7XX
®
DSC
Peripheral Features (Continued):
• Internal 8 MHz and 32 kHz oscillators
• Six UART modules with:
• Up to four SPI modules
• Up to five I
• Separate PLLs for CPU and USB clocks
• Parallel Master and Slave Port (PMP/PSP) with
• Hardware Real-Time Clock and Calendar (RTCC)
• Five 16-bit Timers/Counters (two 16-bit pairs
• Five Capture inputs
• Five Compare/PWM outputs
• Five external interrupt pins
• High-speed I/O pins capable of toggling at up
• High-current sink/source (18 mA/18 mA) on
• Configurable open-drain output on digital I/O pins
Debug Features:
• Two programming and debugging Interfaces:
• Unintrusive hardware-based instruction trace
• IEEE Standard 1149.2 compatible (JTAG)
Analog Features:
• Up to 16-channel, 10-bit Analog-to-Digital
• Two Analog Comparators
- RS-232, RS-485 and LIN support
- IrDA
8-bit and 16-bit data, and up to 16 address lines
combine to create two 32-bit timers)
to 80 MHz
all I/O pins
- 2-wire interface with unintrusive access and
- 4-wire MIPS
boundary scan
Converter:
- 1 Msps conversion rate
- Conversion available during Sleep and Idle
decoder
real-time data exchange with application
Action Group (JTAG) interface
®
with on-chip hardware encoder and
2
C™ modules
®
standard enhanced Joint Test
DS61156F-page 3