XS5G-D4S7 Omron, XS5G-D4S7 Datasheet - Page 15

• Manufacturer Part Number: XS5G-D4S7
• Description: Sensor I/O Connector
• Manufacturer: Omron

Specifications of XS5G-D4S7

• Product Type: Connectors
• Shell Style: Plug
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Precautions
Note: 1. See “XS5/XS2 - Assembly Tooling and Accessories” datasheet for information and precautions regarding assembly, tooling and accessories that
■ Correct Use
Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
Connector Connection and Disconnection
Wiring
Degree of Protection
■ General Precautions
• When connecting or disconnecting Connectors, be sure to hold the
• Do not hold the cable when disconnecting Connectors.
• When mating Connectors, be sure to insert the plug all the way to
• Do not use tools of any sort to mate the Connectors. Always use
• When mating the Connectors to XS2 or other M12 Connectors,
• Always confirm wiring diagrams before wiring sensors, limit
• Lay the cables so that external force is not applied to the
• The degree of protection of Connectors (IP67) is not for a fully
• Do not step on or place any objects on the Connectors. Doing so
• Do not pull excessively on the Connectors or cables. Do not install
• Install the Connectors and cables where they will not be stepped
• Refer to the specifications for your cables before bending the
Connectors by hand.
the back of the socket before attempting to lock the Connectors.
your hands. Pliers or other tools may damage the Connectors.
tighten the lock by hand to a torque of 0.39 to 0.49 N⋅m.
switches, or other devices.
Connectors. Otherwise, the degree of protection (IP67) may not
be achieved.
watertight structure. Do not the Connectors underwater.
may damage the Connectors.
the Connectors or cables in any way that would place a load
directly on the mating section or cable connections. Doing so can
damage the Connectors or break the wires inside the cables.
on to prevent the wires inside the cables from being broken and to
prevent the Connectors from being damaged. If the Connectors or
cables must be installed where they might be stepped on, protect
them with covers.
cables and do not bend them past their minimum bending radius.
2. See “XS2” datasheet for specifics regarding those connectors
are common to the XS5 and XS2 connectors
Round Water-resistant Connectors (M12)
■ Connecting the XS5
1. Connecting the XS5 Plug and Socket
2. Connecting the XS5 and XS2
• If sensors or switches are not attached during installation, protect
• Align the projection on the plug cover with the polarity key on the
• Hold the knurled socket grip, then insert the projection on the plug
• Turn the knurled grips of the socket clockwise approximately
the mating surface of the Connector with a XS2Z-22 Waterproof
Cover of XS2Z-14/15 Dust Cover.
socket, then insert the plug all the way in.
into the groove of the socket.
45 degrees in respect to the plug. A click will indicate that the
Connectors are locked. The locking condition can also be
confirmed by the alignment marks on the plug and socket.
Alignment marks
Polarity key
Protrusion on
cover aligns with
polarity key.
XS5
137