5962-9093201MEA QP SEMICONDUCTOR, 5962-9093201MEA Datasheet - Page 12

• Manufacturer Part Number: 5962-9093201MEA
• Manufacturer: QP SEMICONDUCTOR

Specifications of 5962-9093201MEA

• Lead Free Status / RoHS Status: Not Compliant

DSCC FORM 2234
APR 97
or approved alternatives shall be as specified in the device manufacturer's QM plan in accordance with MIL-PRF-38535. The
test circuit shall be maintained under document revision level control by the device manufacturer's TRB in accordance with
MIL-PRF-38535 and shall be made available to the acquiring or preparing activity upon request. The test circuit shall specify
the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in test method 1005 of
MIL-STD-883.
4.4.2 Group C inspection. The group C inspection end-point electrical parameters shall be as specified in table II herein.
4.4.2.1 Additional criteria for device class M. Steady-state life test conditions, method 1005 of MIL-STD-883:
4.4.2.2 Additional criteria for device classes Q and V. The steady-state life test duration, test condition and test temperature,
4.4.3 Group D inspection. The group D inspection end-point electrical parameters shall be as specified in table II herein.
a.
b.
c.
Test condition B or D. The test circuit shall be maintained by the manufacturer under document revision level control
and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify the
inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in test method
1005 of MIL-STD-883.
T
Test duration: 1,000 hours, except as permitted by method 1005 of MIL-STD-883.
DEFENSE SUPPLY CENTER COLUMBUS
A
= +125 C, minimum.
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43216-5000
1/ PDA applies to subgroup 1.
2/ PDA applies to subgroups 1 and 7.
Interim electrical
Final electrical
Group A test
Group C end-point electrical
Group D end-point electrical
Group E end-point electrical
parameters (see 4.2)
parameters (see 4.2)
requirements (see 4.4)
parameters (see 4.4)
parameters (see 4.4)
parameters (see 4.4)
Test requirements
STANDARD
TABLE II. Electrical test requirements.
1
1,2,3,7,8,9 1/
1,2,3,7,8,9
1
1
1,7,9
method 5005, table I)
(in accordance with
MIL-STD-883,
Subgroups
class M
Device
SIZE
A
1
1,2,3,7,8,9 1/
1,2,3,7,8,9
1
1
1,7,9
MIL-PRF-38535, table III)
class Q
Device
(in accordance with
REVISION LEVEL
Subgroups
1
1,2,3, 2/
7,8,9
1,2,3,7,8,9
1
1
1,7,9
B
class V
Device
SHEET
5962-90932
12