ATF16LV8C-10XC-T Atmel, ATF16LV8C-10XC-T Datasheet - Page 2

• Manufacturer Part Number: ATF16LV8C-10XC-T
• Manufacturer: Atmel

Specifications of ATF16LV8C-10XC-T

• Family Name: ATF16LV8C
• Process Technology: CMOS
• # Macrocells: 8
• # I/os (max): 8
• Frequency (max): 83.3MHz
• Propagation Delay Time: 10ns
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (max): 5.5V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 20
• Supply Current: 55mA
• Lead Free Status / RoHS Status: Not Compliant

ranges are specified over the full 3.0V to 5.25V range for
industrial and commercial temperature ranges.
The ATF16LV8C incorporates a superset of the generic
architectures, which allows direct replacement of the 16R8
family and most 20-pin combinatorial PLDs. Eight outputs
are each allocated eight product terms. Three different
modes of operation, configured automatically with soft-
ware, allow highly complex logic functions to be realized.
Block Diagram
Note:
Absolute Maximum Ratings*
DC and AC Operating Conditions
2
Temperature Under Bias.................................. -40°C to +85°C
Storage Temperature ..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground .........................................-2.0V to +7.0V
Voltage on Input Pins
with Respect to Ground
During Programming.....................................-2.0V to +14.0V
Programming Voltage with
Respect to Ground .......................................-2.0V to +14.0V
Operating Temperature (Ambient)
V
CC
Power Supply
1. Includes optional PD control pin.
ATF16LV8C
(1)
(1)
(1)
The ATF16LV8C can significantly reduce total system
power, thereby enhancing system reliability and reducing
power supply costs. When pin 4 is configured as the
power-down control pin, supply current drops to less than
5 µA whenever the pin is high. If the power-down feature
isn't required for a particular application, pin 4 may be used
as a logic input. Also, the pin keeper circuits eliminate the
need for internal pull-up resistors along with their attendant
power consumption.
*NOTICE:
Note:
1. Minimum voltage is -0.6V DC, which may under-
Commercial
3.0V to 5.5V
0°C - 70°C
shoot to -2.0V for pulses of less than 20 ns.
Maximum output pin voltage is Vcc + 0.75V DC,
which may overshoot to 7.0V for pulses of less
than 20 ns.
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.