F3SNA1222P25 Omron, F3SNA1222P25 Datasheet - Page 10

• Manufacturer Part Number: F3SNA1222P25
• Manufacturer: Omron

Specifications of F3SNA1222P25

• Lead Free Status / RoHS Status: Supplier Unconfirmed

*1. The 4 digits in @@@@ in the model number represent the protective height. Use the formula given in the information on protective height
*2. F3SN-A@@@@P14-01 is a customized model. Consult with your dealer or OMRON representative when ordering this model.
*3. Only models ending in -01, -03, -04, or -05 have this output and functionality.
*4. For the factory setting, the manual reset mode is set to the “start/restart” interlock.
*5. For the factory setting, the function is not set. It can be enabled with the F39-MC11.
*6. Not provided with the F3SN-A@@@@P70 and F3SH-A.
*7. The intermediate mounting bracket is supplied with the following types:
*8. Models with different connector configurations are also available as options. Refer to “Many Connector Variations” on page 2.
Item
Materials
Weight (packed state)
Accessories
Applicable standards
specifications to calculate the height.
For example, if the beam gap is 9 mm, and the No. of beams is 21, the protective height will be 9 × 21 = 189 mm. The model with this protective
height is F3SN-A0189P14.
Using the F39-MC11 can select either the start interlock or the restart interlock.
Types which have the total length of the light curtain from 640 mm to 1280 mm: 1 set for each of emitter and receiver.
Types which have the total length of the light curtain over 1280 mm: 2 sets for each of emitter and receiver.
Model
*8
connection
Stand-
Series
alone
Case: Aluminum, end cap: Zinc die-cast, optical cover: PMMA (acrylic resin), Cable: Oil-resistant PVC
Weight (g) = (Detection width) × 2.4 + α + β
Detection width of 189 to 639 mm: α = 700, Detection width of 652 to 1,267 mm: α = 800,
Detection width of 1,282 to 1,822 mm: α = 900,
Model with no suffix or −01: β = 0, Model with suffix −02, −03, or −05: β = 100, Model with suffix −04: β = 200
Test rod *6, instruction manual, error mode label, mounting brackets (top and bottom),
mounting brackets (intermediate) *7
IEC61496-1, EN61496-1 Type 4 ESPE (Electro-Sensitive Protective Equipment)
IEC61496-2 Type 4 AOPD (Active Opto-electronic Protective Devices)
F3SN-A@@@@P14-01
F3SN-A@@@@P14
*1 *2
*1
F3SN-A@@@@P25-01
F3SN-A@@@@P25
*1
*1
F3SN-A@@@@P40-01
F3SN-A@@@@P40
*1
*1
F3SN-A/F3SN-B/F3SH-A
F3SN-A@@@@P70-01
F3SN-A@@@@P70
*1
*1
F3SH-A09P03-01
F3SH-A09P03
10