SPL BG91-2S-Z OSRAM Opto Semiconductors Inc, SPL BG91-2S-Z Datasheet

no-image

SPL BG91-2S-Z

Manufacturer Part Number
SPL BG91-2S-Z
Description
Manufacturer
OSRAM Opto Semiconductors Inc
Type
QW-LDr
Datasheet

Specifications of SPL BG91-2S-Z

Peak Wavelength
914nm
Beam Divergence Parallel
12°
Beam Divergence Perpendicular
70°
Optical Output Power
60W
Threshold Current (max)
14A
Operating Current
74A
Power Supply Requirement
Single
Lead Free Status / RoHS Status
Compliant
Unmontierte Laserbarren, 50% Füllfaktor, 915 nm
Un-mounted Laser Bars, 50% Fill-factor, 915 nm
Lead (Pb) Free Product - RoHS Compliant
SPL BG91-2S
Besondere Merkmale
• Unmontierter Laserbarren
• Design mit 25 Emittern (50% Füllfaktor)
• Empfohlene optische Leistung 60 W
• Typischer Konversionswirkungsgrad 54 %
• Hocheffiziente und zuverlässige MOVPE
• Standard-Wellenlängenselektion von ± 3 nm
• Andere zentrale Pulswellenlängen auf Anfrage
• Lötbare p- und n-seitige Metallisierung
• Al-freie aktive Zone
Anwendungen
• Empfohlen für kontinuierliche (CW)-
• Pumpen von Festkörper- und Faserlasern
• Direkte Materialbearbeitung
• Erwärmen, Beleuchten
• Medizinische Anwendungen
• Druckanwendungen
Sicherheitshinweise
Je nach Betriebsart emittieren diese Bauteile
hochkonzentrierte,
Strahlung, die gefährlich für das menschliche
Auge sein kann. Produkte, die diese Bauteile
enthalten, müssen gemäß den Sicherheits-
richtlinien der IEC-Norm 60825-1 behandelt
werden.
2007-04-20
Quantenfilmstruktur
Anwendungen
nicht
sichtbare
Infrarot-
1
Features
• Un-mounted monolithic linear array
• 25 emitter (50% fill-factor) design
• Recommended optical power 60 W
• Typical conversion efficiency 54 %
• High efficiency and reliable MOVPE-grown
• Standard wavelength selection is ± 3 nm
• Other pulse peak wavelengths are available
• Solderable p- and n-side metallization
• Al-free active region
Applications
• Recommended for continuous wave (cw)-
• Pumping of solid-state and fiber lasers
• Direct material processing
• Heating, illumination
• Medical applications
• Printing applications
Safety Advices
Depending on the mode of operation, these
devices emit highly concentrated non-visible
infrared light which can be hazardous to the
human eye. Products which incorporate these
devices have to follow the safety precautions
found in IEC 60825-1 “Safety of laser products”.
quantum-well structure
upon request
applications

Related parts for SPL BG91-2S-Z

SPL BG91-2S-Z Summary of contents

Page 1

... Unmontierte Laserbarren, 50% Füllfaktor, 915 nm Un-mounted Laser Bars, 50% Fill-factor, 915 nm Lead (Pb) Free Product - RoHS Compliant SPL BG91-2S Besondere Merkmale • Unmontierter Laserbarren • Design mit 25 Emittern (50% Füllfaktor) • Empfohlene optische Leistung 60 W • Typischer Konversionswirkungsgrad 54 % • Hocheffiziente und zuverlässige MOVPE Quantenfilmstruktur • ...

Page 2

... Wavelength Symbol Symbol min 150 COD η 2) 1.00 2) η tot θ ⊥ θ λ 908 pulse 2) 2 SPL BG91-2S 2) Bestellnummer 2) Ordering Code 911 nm Q65110A6954 < 0.5 K/W voraus. th < 0.5 K/W. Wert Values typ. max 250 - 1. 911 914 Einheit Unit Grad deg. ...

Page 3

... K/W. The operating peak emission wavelength depends on the operating th 3 Wert Values typ. max < 0.5 K/W voraus. Die zentrale The operating peak emission wavelength in th λ (1 μs pulse width at 4 kHz repetition rate). All pulse SPL BG91-2S Einheit Unit nm % ...

Page 4

... If they fail reasonable to assume that the health of the user may be endangered. 2007-04-20 Symbol Werte Symbol Values min. typ 200 - 400 9.9 10 105 115 H L 1190 1200 2 with the express written approval of OSRAM OS. 4 SPL BG91-2S Einheit Unit max. - μm - μ 10.1 mm μm 125 μm 1210 ...

Related keywords