3410-0070 REDINGTON COUNTERS, 3410-0070 Datasheet - Page 2

• Manufacturer Part Number: 3410-0070
• Description: Hour Meter 10-300VDC/20-300VAC Input Two Hole Rectangular Face Front Reset Only
• Manufacturer: REDINGTON COUNTERS

Specifications of 3410-0070

• Supply Voltage Range: 20-300 VAC/10-300 VDC
• Time Range: 0.1sec To 9999999.9hr

Functions
Preset Hour Meter:
Inductive Models:
Front Panel Switch Functions:
Available Icons
Dimensions
1.10 [27.9]
1.10 [27.9]
Model 34
Panel Cutout: 1.45” [36.8mm] x 0.95” [24.1mm]
Panel Cutout: 1.45” [36.8mm] x 0.95” [24.1mm]
Maximum Panel Thickness: 0.375” [9.5mm]
Maximum Panel Thickness: 0.375” [9.5mm]
1.41 [35.8]
1.43 [36.3]
.88 [22.3]
1.41 [35.8]
1.43 [36.3]
.88 [22.3]
SEL:
RST:
1.60 [40.6]
Rectangular Flush Mount
2-Hole No-Hole Mount
The preset function is centered on the output signal. When the time reaches the preset value, the output signal is turned “on”.
The surface mount Inductive unit is designed with an inductive interface. The unit will sense the firing of a spark plug on most
small gasoline powered internal combustion engines. The wire lead from the unit is wrapped around the spark plug wire.
Inductive models are available with and without tachometers. Most small engines provide 1 spark per RPM, in which case the
maximum RPM is 30,000. Some small engines provide 2 sparks per RPM, the maximum RPM is then 15,000. Models are
available that can be field (front panel switches) or factory programmed for 1.0, 2.0, or 0.5 sparks/pulses per RPM.
The Preset function is time “up”.Upon reaching the preset value the preset can be automatically reset, or it can await an
SERVICE
CHANGE
external reset.
.75 [19.0]
.75 [19.0]
.25 [6.3]
.25 [6.3]
.28 [7.0]
.28 [7.0]
Front panel switches can be used for reset, display selection and programming. The two front Panel switches
are used as follows:
During programming this switch is used to select options. The SEL switch is used during programming to move
horizontally in the programming flow chart.
This is the reset switch during normal operation. During programming the RST switch is used to enter an option.
The RST switch is used during programming to move vertically in the programming flow chart.
.89 [22.6]
.89 [22.6]
.34 [8.6]
.34 [8.6]
www.redingtoncounters.com
.05 [1.3]
.05 [1.3]
.05 [1.3]
.05 [1.3]
OIL
OIL FILTER
.50 [12.7]
.50 [12.7]
Electronic
1.10 [27.9]
.79 [20.0]
Panel Cutout: 1.45” [36.8mm] x 0.95” [24.1mm]
Panel Cutout: 1.45” [36.8mm] x 0.95” [24.1mm]
Maximum Panel Thickness: 0.375” [9.5mm]
LAMP
AIR FILTER
1.43 [36.3]
1.41 [35.8]
1.43 [36.3]
2.21 [56.1]
.88 [22.3]
.88 [22.3]
1.75 [44.4]
1.29 [32.7]
Flush Rectangular Mount
2-Hole Mount
.25 [6.3]
.75 [19.0]
.75 [19.0]
.25 [6.3]
.28 [7.0]
.28 [7.0]
.89 [22.6]
LCD Hour Meter
MUFFLER
.34 [8.6]
.05 [1.3]
.05 [1.3]
1.98 [50.3]
.03 [0.7]
.05 [1.3]
.05 [1.3]
.50 [12.7]
.50 [12.7]
.34 [8.6]
9