NUF4402MNT1G ON Semiconductor, NUF4402MNT1G Datasheet - Page 5

• Manufacturer Part Number: NUF4402MNT1G
• Description: IC FILTER 4CH EMI ESD PROT 8DFN
• Manufacturer: ON Semiconductor

Specifications of NUF4402MNT1G

• Resistance (ohms): 100
• Capacitance: 12pF
• Package / Case: 8-TDFN Exposed Pad
• Resistance In Ohms: 100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Tolerance: -
• Other names: NUF4402MNT1G; NUF4402MNT1GOSTR

the first two terms of the Fourier series approximation most
of the signal content is at the fundamental (maximum
supported) frequency and the third harmonic frequency. If a
signal with a frequency of 33.33 MHz is input to this filter,
the first two terms are sufficiently passed such that the signal
is only mildly affected, as is shown in Figure 9a. If a signal
Table 2. Frequency Chart
Considering that 85% of the amplitude of the square is in
Bandwidth
100 MHz
200 MHz
300 MHz
3 dB –
6 dB –
9 dB –
Maximum Supported
Input Waveform
Input Waveform
Input Waveform
33.33 MHz (f
66.67 MHz (f
100 MHz (f
Frequency
3
1
2
)
)
)
Figure 9. Input and Output Waveforms of Filter
Third Harmonic
Frequency
100 MHz
200 MHz
300 MHz
b) Frequency = f
a) Frequency = f
c) Frequency = f
http://onsemi.com
5
with a frequency of 66.67 MHz is input to this same filter,
the third harmonic term is significantly attenuated. This
serves to round the signal edges and skew the waveform, as
is shown in Figure 9b. In the case that a 100 MHz signal is
input to this filter, the third harmonic term is attenuated even
further and results in even more rounding of the signal edges
as is shown in Figure 9c. The result is the degradation of the
data being transmitted making the digital data (1’s and 0’s)
more difficult to discern. This does not include effects of
other components such as interconnect and other path losses
which could further serve to degrade the signal integrity.
While some filter products may specify the 6 dB or 9 dB
bandwidths, actually using these to calculate supported
frequencies (and corresponding data rates) results in
significant signal degradation. To ensure the best signal
integrity possible, it is best to use the 3 dB bandwidth to
calculate the achievable data rate.
1
2
3
Output Waveform
Output Waveform
Output Waveform