09 47 474 7201 HARTING, 09 47 474 7201 Datasheet - Page 111

• Manufacturer Part Number: 09 47 474 7201
• Description: Ha-Vis Smart Patch Cable CAT.6 Yel. 1m
• Manufacturer: HARTING

Specifications of 09 47 474 7201

• Rohs Compliant: Yes

HARTING RJ Industrial
The cabling
Simple, safe and fast
Connectors must allow a reliable cable
connection with few parts and minimal effort .
With the development of the new HARTING
RJ Industrial
customer requirements were paramount . The
connector housing with the novel cable clamp
is delivered with pre-assembled connecting nut .
The RJ45 insert comprises of only two parts .
The moveable cable manager mounted on the
connector body allows the simple insertion of
wires and always guarantees a fault free circuit
of the insulation displacement connector . For
solid / stranded
1.
3.
5.
Slide connector housings with a pre-assembled screw over
AWG 27 - 22
!
Lock the shield sheet with an audible “click”
Cut wires to correct length with side cutters
the cable, then cut and strip the cable
®
10G RJ45 connector these
Ø 4.5 – 9 mm
®
10G – General information
rapid identification of the correct position of the
coloured individual wires, the cable manager
has been furnished with a label containing
a circuit plan . This circuit label displays the
universally used wire colours according to EIA/
TIA-568/A and B and for 4-wire industrial Fast
Ethernet applications indicating the relative
contact allocation .
After wiring the connector a portion of the
label remains on the plug thus allowing simple
recognition of the relative contact position in the
cable manager on re-wiring the plug . All these
details permit – in only six steps – a rapid and
safe local assembly, whereby a time saving of
up to 30 % can be realized .
2.
4.
6.
Insert wires according to selected colour coding into the
Close cable manager and lock with an audible “click“
a
Slide the RJ45 insert into the connector housing
a
Tighten the cable screw nut by hand
and lock with an audible “click”.
cable manager
b
b
111