1-111492-1 TE Connectivity, 1-111492-1 Datasheet - Page 4

• Manufacturer Part Number: 1-111492-1
• Description: 050 UNIV I/O 30DP NO EARS LTCH
• Manufacturer: TE Connectivity
• Series: Universal I/Or

Specifications of 1-111492-1

• Rohs Compliant: NO
• Product Line: AMP-LATCH
• Connector Type: Connector Assembly
• Shrouded: Yes
• Termination Method To Wire/cable: IDC
• Ul File Number: E28476
• Csa File Number: LR 7189
• Mating Post Length (mm [in]): 6.10 [0.240]
• Panel Mount Retention: Without
• Contact - Rated Current (a): 1
• Operating Voltage Reference: AC
• Operating Voltage (vac): 250
• Wire/cable Size (awg): 26 – 28
• Wire/cable Size (mm²): 0.08 – 0.15
• Wire/cable Size (cma): 158 – 296
• Profile Height (y-axis) (mm [in]): 23.75 [0.935]
• Number Of Positions: 50
• Centerline (mm [in]): 2.54 [0.100]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Number Of Rows: 2
• Mating Retention: With
• Length (x-axis) (mm [in]): 78.03 [3.072]
• Width (z-axis) (mm [in]): 8.38 [0.3299]
• Contact Design: Tuning Fork
• Contact Type: Pin
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold or Palladium Nickel or Performance Based
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.762 [30]
• Tail Plating Material: Tin-Lead
• Tail Plating, Thickness (µm [?in]): 2.54 [100]
• Connector Style: Plug
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 250
• Operating Temperature (°c [°f]): -65 – +105 [-85 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.81 – 0.97 [0.032 – 0.0381]
• Application Use: Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Tray

3.6.
4.
4.1.
4.2.
4.3.
Rev A
Examination of product
Termination resistance, dry circuit
Dielectric withstanding voltage
Insulation resistance
Vibration
Physical shock
Mating force
Unmating force
Durability
Thermal shock
Humidity-temperature cycling
Mixed flowing gas
Temperature life
NOTE
Product Qualification and Requalification Tests
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to product or to manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of original testing
sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that product meets requirements of Figure 1. Failures attributed to
equipment, test setup, or operator deficiencies shall not disqualify product. When product failure
occurs, corrective action shall be taken and samples resubmitted for qualification. Testing to confirm
corrective action is required before resubmittal.
Sample Selection
Connector housings and contacts shall be prepared in accordance with applicable Instruction
Sheets and shall be selected at random from current production. All test groups shall consist of
minimum of 5 connectors per part number with minimum of 30 randomly selected contacts
distributed between the 5 connectors being measured. Testing for test group 1 shall be performed
on minimum and maximum mounted connector sizes available. Testing for test group 2 shall be
performed on maximum free hanging connector size available. Testing for test groups 3 and 4
shall be performed on mid-range mounted connectors.
Test Sequence
Qualification inspection shall be verified by testing samples as specified in Figure 2.
Test or Description
(a) See Para 4.1.A.
(b) Numbers indicate sequence in which tests are performed.
(c) Precondition samples with 10 cycles durability.
(d) Perform manually, connector shall be hand held.
1, 9
3, 7
1
5
6
2
8
4
Figure 2
3 (d)
1, 6
2, 5
Test Sequence (b)
2
4
Test Group (a)
3 (c)
1, 5
2,4
3
1, 8
3, 7
2, 6
4
4
5
108-1336
4 of 6