1-1761606-0 TE Connectivity, 1-1761606-0 Datasheet - Page 3

• Manufacturer Part Number: 1-1761606-0
• Description: IDC LOW PRO HDR 30P VERT LG LAT BLK
• Manufacturer: TE Connectivity

Specifications of 1-1761606-0

• Product Line: AMP-LATCH
• Profile: Low
• Pcb Mounting Orientation: Vertical
• Pcb Mount Retention: Without
• Mating Connector Lock: Without
• Housing Style: 4-Sided
• Ejection Latches: With
• Post Size (mm [in]): 0.64 [.025]
• Shrouded: Yes
• [shrouded] End Dimension (mm [in]): 3.81 [0.150]
• Termination Post Length (mm [in]): 2.60 [0.102]
• Solder Tail Contact Plating: Tin over Nickel
• Header Type: Pin Header
• Number Of Positions: 30
• Centerline, Matrix (mm [in]): 2.54 x 2.54 [.100 x .100]
• Daisy Chain: With
• Preloaded: Yes
• Contact Plating, Mating Area, Material: Gold Flash over Palladium Nickel
• Contact Shape: Square
• Contact Base Material: Phosphor Bronze
• Connector Style: Header - Pin
• Mating Alignment Type: Center, Military
• Mating Alignment: With
• Housing Material: Nylon
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Temperature Rating: Standard

3.6.
Therm al shock.
Hum idity/tem perature cycling.
Rev F
NOTE
Product Qualification and Requalification Test Sequence
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
(a)
(b)
See paragraph 4.1.A.
Numbers indicate sequence in which tests are performed.
Exam ination of product
Insulation resistance
W ithstanding voltage
Solderability
Com ponent resistance to wave soldering
Contact retention
Therm al shock
Hum idity/tem perature cycling
Test or Exam ination
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirem ent
Figure 2
1,3,5
Test Sequence (b)
2
1
4
Test Group (a)
EIA-364-32, Test Condition II.
Subject unm ated specim ens to 5
cycles between -65 and 105°C with
30 m inute dwells at tem perature
extrem es.
EIA-364-31, Method III.
Subject unm ated specim ens to 10
cycles (10 days) between 25 and
65°C at 80 to 100% RH with cold
shock.
1,3
2
2
1,8
2,6
3,7
3
4
5
Procedure
108-40018
3 of 5