DS1100LU-100 Maxim Integrated Products, DS1100LU-100 Datasheet - Page 3

• Manufacturer Part Number: DS1100LU-100
• Description: DELAY LINE 3V 5TAP 100NS 8-USOP
• Manufacturer: Maxim Integrated Products

Specifications of DS1100LU-100

• Number Of Taps/steps: 5
• Function: Tapped
• Delay To 1st Tap: 20nS
• Tap Increment: 20nS
• Available Total Delays: 100ns
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-MSOP, Micro8™, 8-uMAX, 8-uSOP,
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Independent Delays: -

NOTES:
1) Initial tolerances are ± with respect to the nominal value at +25°C and V
2) Temperature and voltage tolerance is with respect to the nominal delay value over the stated
3) All tap delays tend to vary unidirectionally with temperature or voltage changes. For example, if TAP
4) Intermediate delay values are available on a custom basis. For further information, contact the factory
5) All voltages are referenced to ground.
6) Measured with outputs open.
7) See Test Conditions section at the end of this data sheet.
8) Frequencies higher than 1MHz result in higher I
9) At or near maximum frequency the delay accuracy can vary and will be application sensitive (i.e.,
Figure 1. LOGIC DIAGRAM
Figure 2. TIMING DIAGRAM: SILICON DELAY LINE
and trailing edge.
temperature range, and a supply-voltage range of 3.0V to 3.6V.
1 slows down, all other taps also slow down; TAP3 can never be faster than TAP2.
at [e-mail].
decoupling, layout).
3 of 7
CC
values.
CC
= 3.3V for both leading
DS1100L