1116603-1 TE Connectivity, 1116603-1 Datasheet - Page 3

• Manufacturer Part Number: 1116603-1
• Description: TOOLLESS JACK,ASSY,RJ11,CAT3
• Manufacturer: TE Connectivity
• Series: SL Seriesr

Specifications of 1116603-1

• Product Type: Connector - Modular
• Jack Type: RJ11 / RJ14 / RJ25
• Wiring Pattern: 3-Pair (RJ-11, RJ-14C, RJ-25C)
• Termination Style: Toolless
• Keyed: No
• Performance Category: Cat 3
• Stuffer Cap Type: Hinged
• Stuffer Cap Material: Polycarbonate
• Stuffer Cap Color: Clear
• Shielded: No
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Number Of Positions: 6
• Netconnect Select System: Yes
• Conductor O.d. (mm [in]): 1.14 [0.045]
• Mount Type: Panel Mount
• Wire Range (solid) (mm [awg]): 22-24
• Wire Range (stranded) (mm² [awg]): 24
• 110 Block Material: Polycarbonate
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Contact Plating, Mating Area, Thickness (µm [?in]): 1.27 [50]
• Housing Color: Light Almond
• Housing Material: Polyphenylene Oxide
• Ul Flammability Rating: UL 94V-0
• Dust Cover: Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Converted to comply with RoHS directive
• Packaging Method: Poly Bag
• Packaging Quantity: 1

Rev C
Durability, jack IDC.
Mating force.
Unm ating force.
Plug retention in jack.
Therm al shock.
Hum idity-tem perature cycling.
Tem perature life.
Mixed flowing gas.
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
See Note.
10 pounds m axim um .
5 pounds m axim um .
Plug shall not dislodge from jack.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirem ent
TE Spec 109-42 (Rev E), Condition
TE Spec 109-27 (Rev D).
Term inate and reterm inate IDC
contact for 30 cycles.
A.
Measure force necessary to m ate
specim ens with latch depressed at
a m axim um rate of .5 inch per
m inute.
TE Spec 109-42 (Rev E), Condition
A.
Measure force necessary to
unm ate specim ens with latch
depressed at a m axim um rate of .5
inch per m inute.
Apply axial load of 20 pounds to
plug housing at a rate of .5 inch per
m inute with plug m ated in jack and
latch engaged.
TE Spec 109-22 (Rev C).
Subject m ated specim ens to 100
cycles between -40 and 70°C.
TE Spec 109-23-4 (Rev J),
Condition C.
Subject m ated specim ens to 21
cycles between 25 and 65°C at
95% RH with -10 C cold shock.
TE Spec 109-43 (Rev E).
Subject m ated specim ens to
tem perature life at 70°C for 500
hours.
TE Spec 109-85-2 (Rev N).
Subject m ated specim ens to
environm ental class IIA for 14 days.
Procedure
108-1916
3 of 6