1217670-1 TE Connectivity, 1217670-1 Datasheet - Page 2

• Manufacturer Part Number: 1217670-1
• Description: CLSTR BLK RCPT AMVAR 400-1600
• Manufacturer: TE Connectivity

Specifications of 1217670-1

• Product Type: Contact
• Insulation Support: Insulation Support
• Pin Size (mm [in]): 3.18 [0.125]
• Wire/cable Type: Lead Wire
• Insulation Diameter (mm [in]): 1.52-2.54 [.060-.100]
• Finish: Tin
• Contact Retention In Housing: High Retention Force
• Wire/cable Size (cma): 400 – 1,600
• Stock Thickness (mm [in]): 0.51 [0.020]
• Contact Configuration: Receptacle
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip

3.4.
3.5.
Exam ination of product.
Dielectric withstanding voltage.
Tem perature rise vs current.
Crim p tensile.
Contact retention in housing.
See Figure 6 for product list.
Contact engaging force onto
header.
Contact separating force from
header.
Rev G
Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions per Test Specification 109-1.
Test Requirem ents and Procedures Sum m ary
Test Description
Meets requirem ents of product
drawing and Application
Specification 114-2019.
2.7 kilovolts AC at sea level.
1 second hold.
See Figure 3.
Note: Tensile values for
AMPLIVAR* crim p receptacles are
70% m inim um of the wire strength.
22 N [5 lbf] m inim um for standard
product.
60 N [14 lbf] m inim um for high force
product.
133 N [30 lbf] m axim um per cluster
block assem bly.
12 N [2.75 lbf] m inim um per
contact.
36 N [8.25 lbf] m inim um per cluster
block assem bly.
Stranded W ire
Size (AW G)
22
18
16
14
12
10
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirem ent
(N [lbf] m in)
110 [25]
160 [37]
250 [57]
310 [70]
350 [80]
Tensile
44 [10]
EIA-364-70, Method 1.
Visual, dim ensional and functional
per applicable inspection plan.
EIA-364-20 and IEC 60512-4-1.
Test between adjacent term inals of
m ated sam ples.
Measure tem perature rise at rated
current.
See Figure 4.
EIA-364-8.
Determ ine crim p tensile at a rate of
25.4 m m [1 in] per m inute.
TE Spec 109-30.
Apply an axial load to crim ped
contacts in housing by gripping the
wire.
TE Spec 109-35.
Measure force necessary to engage
header using appropriate gage (3
pin gages equally spaced on a
13.46 ± 0.03 m m [.530 ± .001 in]
diam eter circle).
See Figures 5 and 6.
TE Spec 109-35.
Measure force necessary to
separate appropriate gage (3 pin
gages equally spaced on a 13.46 ±
0.03 m m [.530 ± .001 in] diam eter
circle) from header.
See Figures 5 and 6.
Procedure
108-2008
2 of 8