487769-2 TE Connectivity, 487769-2 Datasheet - Page 2

• Manufacturer Part Number: 487769-2
• Description: 004 HOUSING FFC RCPT 100CL SR
• Manufacturer: TE Connectivity

Specifications of 487769-2

• Rohs Compliant: YES
• Product Type: Connector
• Type Of Connector: Slimline
• Wire/cable Type: FFC
• Mating Connector Lock: With
• Mating Connector Lock Type: Detent
• Mounting Ears: Without
• Flame Retardant: Yes
• Panel Mount Retention: Without
• Centerline (mm [in]): 2.54 [0.100]
• Number Of Positions: 4
• Number Of Rows: Single
• Preloaded: No
• Accepts Contact Gender: Receptacle
• Connector Style: Plug
• Mating Alignment: Without
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Cable

3.4.
3.5.
Exam ination of product.
Term ination resistance, dry circuit.
Dielectric withstanding voltage.
Insulation resistance.
Vibration, random .
Physical shock.
Connector m ating force.
Rev L
Perform ance and Test Description
Product is designed to m eet electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. All tests are perform ed at am bient environm ental conditions per Test Specification
109-1 unless otherwise specified.
Test Requirem ents and Procedures Sum m ary
Test Description
25 m illiohm s m axim um for gold
Meets requirem ents of product
drawing and Application
Specifications 114-16003 and 114-
16015.
plating.
45 m illiohm s m axim um for tin
plating.
No breakdown or flashover.
5000 m egohm s m inim um .
No discontinuities greater than 1
m icrosecond.
See Note (a).
No discontinuities greater than 1
m icrosecond.
See Note (a).
15 ounces m axim um per contact,
standard pressure.
36 ounces m axim um per contact,
high pressure.
20 ounces m axim um per contact,
PCB edge connector.
Voltage
Test
720
480
330
Figure 1 (cont)
MECHANICAL
ELECTRICAL
Sea Level
Requirem ent
Altitude
25000
50000
Feet
Test between adjacent contacts of
Visual, dim ensional and functional
per applicable quality inspection
plan.
Subject m ated contacts assem bled
in housing to 50 m v open circuit at
100 m a m axim um .
See Figures 3, 4 and 5.
AMP Spec 109-6-1.
Test between adjacent contacts of
m ated connector assem blies.
AMP Spec 109-29-1.
m ated connector assem blies.
AMP Spec 109-28-4.
Subject m ated connectors to 20.71
G's rm s.
See Figure 6.
AMP Spec 109-21-5,
Test level F,
Duration 20 m inutes.
Subject m ated connectors to 100
G's sawtooth shock pulses of 6
m illiseconds duration. 3 shocks in
each direction applied along 3
m utually perpendicular planes, 18
total shocks.
See Figure 6.
AMP Spec 109-26-9.
Measure force necessary to m ate
connector assem blies with locking
latches a distance of .150 inch from
point of initial contact using free
floating fixtures at rate of .5 inch per
m inute.
AMP Spec 109-42,
Condition A.
Procedure
108-9024
2 of 7