5-1479184-4 TE Connectivity, 5-1479184-4 Datasheet - Page 3

• Manufacturer Part Number: 5-1479184-4
• Description: KIT,8P,MOD PLUG,STRANDED,CAT6
• Manufacturer: TE Connectivity

Specifications of 5-1479184-4

• Rohs Compliant: YES
• Product Type: Connector
• Number Of Contacts Loaded: 8
• Cable Style: Round Stranded
• Performance Category: Cat 6
• Latch Style: Standard
• Keyed: No
• Small Conductor: No
• Qty./box: 25
• Shield Material: Brass
• Shielded: Yes
• Solder Tail Contact Plating: Gold Flash over Nickel
• Number Of Positions: 8
• Conductor O.d. (mm [in]): 0.89 – 1.00 [0.035 – 0.040]
• Cable Jacket Outer Diameter Range (mm [in]): 6.00 – 7.00 [0.236 – 0.280]
• Shield Plating: Nickel
• Preloaded: Yes
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (50)
• Connector Style: Plug - Modular
• Housing Material: Polycarbonate GF
• Ul Flammability Rating: UL 94V-2
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Box
• Lead Free Status / Rohs Status: Details

Voltage proof.
Vibration, jack-plug interface and
IDC-wire interface.
Mechanical shock, jack-plug
interface.
Durability, jack-plug interface using
a 6 position plug.
Durability, jack-plug interface.
Plug insertion force, jack-plug
interface.
Plug withdrawal force, jack-plug
interface.
Plug retention in jack, jack-plug
interface.
Rev K
Test Description
One m inute hold with no breakdown
or flashover.
No discontinuities of 1 m icrosecond
m axim um .
Shall rem ain m ated and show no
evidence of physical dam age.
See Note.
No discontinuities of 5
m icroseconds m axim um .
See Note.
Perm anent deflection of contacts in
positions 1 and 8 are acceptable if
the specim ens m eet the
requirem ents of additional tests.
See Note.
See Note.
5 pounds m axim um , unshielded.
8 pounds m axim um , shielded.
5 pounds m axim um , unshielded.
8 pounds m axim um , shielded.
Plug shall not dislodge from jack.
Figure 1 (continued)
MECHANICAL
Requirem ent
IEC 60512-4-1.
1000 volts AC at sea level.
Test between adjacent contacts of
m ated plug and jack.
IEC 60512-6-4.
Subject m ated plug and term inated
jack to frequency range of 10 to 55
Hz with displacem ent am plitude of
.014 inch. Sweep cycles per
direction shall be 5 in each direction
of 3 axis which are m utually
perpendicular planes.
IEC 60512-6-3.
Subject m ated plug and term inated
jack to 30 G's half-sine shock wave
of 11 m illiseconds duration. Three
shocks in each direction (2 total)
applied along 3 m utually
perpendicular planes (3 axis), 18
total shocks.
IEC 60512-9-1.
Mate and unm ate plug and jack
interface with latch inoperative for
200 cycles with a 6 position plug at
a m axim um rate of 500 (autom atic)
or 300 (m anual) cycles per hour.
IEC 60512-9-1.
Mate and unm ate plug and jack
interface with latch inoperative for
750 cycles at a m axim um rate of
500 (autom atic) or 300 (m anual)
cycles per hour.
IEC 60512-13-1.
Measure force required to m ate
plug and jack with latch depressed
at a m axim um rate of .5 inch per
m inute.
IEC 60512-13-1.
Measure force required to unm ate
plug and jack with latch depressed
at a m axim um rate of .5 inch per
m inute.
EIA 364-98.
Apply an axial load of 20 pounds to
plug housing at a rate of .5 inch per
m inute with plug m ated in jack and
latch engaged. Maintain load for 5
seconds.
Procedure
108-1990
3 of 8