533082-8 TE Connectivity, 533082-8 Datasheet - Page 2

• Manufacturer Part Number: 533082-8
• Description: HDI KEY/PWR PIN UNPLTD
• Manufacturer: TE Connectivity

Specifications of 533082-8

• Rohs Compliant: YES
• Product Type: Contact
• Pcb Mount Retention: Without
• Thread Length (mm [in]): 12.07 [0.475]
• Contact Type: Pin
• Contact Plating, Mating Area, Material: Unplated
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant

3.4.
3.5.
Exam ination of product.
Term ination resistance, specified
current.
Term ination resistance, low level.
Dielectric withstanding voltage.
Insulation resistance.
Vibration.
Physical shock.
Mating force.
Rev C
Perform ance and Test Description
Connectors shall be designed to m eet electrical, m echanical and environm ental perform ance
requirem ents specified in Figure 1.
Test Requirem ents and Procedures Sum m ary
Test Description
.015 ohm s m axim um initial.
Meets requirem ents of product
drawing.
.015 ohm s m axim um initial.
.020 ohm s m axim um final.
.020 ohm s m axim um final.
2 m illiam peres m axim um leakage
current.
5000 m egohm s m inim um initial.
No discontinuities greater than 1
m icrosecond.
No physical dam age.
No discontinuities greater than 1
m icrosecond.
No physical dam age.
Term ination resistance, low level.
1.9 ounces m axim um average per
contact.
Test Voltage
(rm s)
900
200
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirem ent
Sea Level
70,000
Altitude
Feet
Test between adjacent contacts of
Visual, dim ensional and functional
per applicable inspection plan.
Measure potential drop of m ated
contacts assem bled in housing
using 3 am peres m axim um
Calculate resistance.
See Figure 3.
TE Spec 109-25.
Subject m ated contacts assem bled
in housing to 50 m v open circuit at
100 m a m axim um .
See Figure 3.
TE Spec 109-6-1.
Tests between adjacent contacts of
unm ated connector and contacts to
hardware.
TE Spec 109-29-1.
unm ated connector and contacts to
hardware.
TE Spec 109-28-4.
Subject wired and m ated
connectors to 15 G's 10-2000 Hz
with 100 m a current applied.
TE Spec 109-21-3.
Subject wired and m ated connector
to 100 G's sawtooth shock pulses of
6 m illiseconds duration. 3 m utually
perpendicular planes, total 18
shocks.
TE Spec 109-26-9.
Measure force necessary to m ate
connector assem bly after 3
unm onitored cycles.
Calculate force per contact.
TE Spec 109-42, Condition A.
Procedure
108-9063
2 of 6