3204X503P TE Connectivity, 3204X503P Datasheet - Page 2

• Manufacturer Part Number: 3204X503P
• Description: SMD TRIMMER 3204 50K SMD TRIMMER 3204 50K
• Manufacturer: TE Connectivity
• Series: 3204Xr

Specifications of 3204X503P

• Cermet: RESISTANCE, TRACK
• Power Rating: 0.1W
• Temp, Op. Max: +85(DEGREE C)
• Temp, Op. Min: -20(DEGREE C)
• Temp. Coeff, +: 250PPM/(DEGREE C)
• Temp. Coeff,: ROHS COMPLIANT
• Product Type: Variable Resistor
• Resistor Type: Trimmer
• Element: Cermet
• Sealed: Semi-Sealed
• Mount Angle: Horizontal
• Termination Type: Surface Mount Terminals
• Resistance Selection (?): K
• Resistance (?): 50K
• Power Rating (w): 0.10
• Tolerance (%): 25
• Termination Post Orientation: Delta
• Package, Component Size: 4
• Sections: Single
• Adjustment Location: Top
• Adjustment Style: Screwdriver Slot
• Operating Function: Single Turn
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Converted to comply with RoHS directive
• Temperature Coefficient (ppm/°c): 250

Literature No. 1773132
Issued: 03-08
Dimensions are shown for
reference purposes only.
Dimensions
Substrate Layout
Application Notes -
Ambient Temperature
Care must be taken with regard to ambient temperature of potentiometers Load should be derated in
accordance with specified derating curve, at high temperatures.
Anode Oxidation
When D.C. current is used and the trimmer is to remain in one set position for a long period, it is good
practice to connect the negative line to the resistance element and the positive line to the wiper terminal.
With the polarity reversed, particularly in moist conditions, it is possible for surface oxidation of the contact
to cause a resistance increase.
Storage
For maximum possible shelf life do not disturb polythene sleeve until you are ready to use
the potentiometer.
How to Order
SMD Economy Trimmers
Type 3204 Series
Common Part
Sealed Trimmer
3204 - 4mm
3204
Dimensions are in
millimetres unless
otherwise specified.
X - Terminals 1 and 3
Orientation
sprocket holes
away from the
X
Specifications subject to
change.
resistance value and the
Resistance Value
third denotes the num-
The first two digits are
ber of zeros following.
significant figures of
e.g. 1K: 102
100K: 104
5K: 502
502
passives.tycoelectronics.com
tycoelectronics.com
Tolerance
P - 25 %
P