PIC18F86K90-I/PT Microchip Technology, PIC18F86K90-I/PT Datasheet - Page 194

• Manufacturer Part Number: PIC18F86K90-I/PT
• Description: 64kB Flash, 4kB RAM, 1kB EE, 16MIPS, NanoWatt XLP, LCD, 5V 80 TQFP 12x12x1mm TRA
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F86K90-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F87K90 FAMILY
13.8.4
When Timer1 Gate Single Pulse mode is enabled, it is
possible to capture a single pulse gate event. Timer1
Gate Single Pulse mode is enabled by setting the
T1GSPM bit (T1GCON<4>) and the T1GGO/T1DONE
bit (T1GCON<3>). The Timer1 will be fully enabled on
the next incrementing edge.
On the next trailing edge of the pulse, the T1GGO/
T1DONE bit will automatically be cleared. No other
gate events will be allowed to increment Timer1 until
the T1GGO/T1DONE bit is once again set in software.
FIGURE 13-6:
DS39957B-page 194
TMR1GE
T1GSPM
T1DONE
T1GPOL
T1GGO/
T1GVAL
RTCCIF
T1G_IN
Timer1
T1CKI
TIMER1 GATE SINGLE PULSE
MODE
TIMER1 GATE SINGLE PULSE MODE
Cleared by Software
N
Counting Enabled on
Rising Edge of T1G
Set by Software
Preliminary
N + 1
Clearing the T1GSPM bit of the T1GCON register will
also clear the T1GGO/T1DONE bit. (For timing details,
see Figure 13-6.)
Simultaneously enabling the Toggle and Single Pulse
modes will permit both sections to work together. This
allows the cycle times on the Timer1 gate source to be
measured. (For timing details, see Figure 13-7.)
13.8.5
When the Timer1 gate value status is utilized, it is
possible to read the most current level of the gate
control value. The value is stored in the T1GVAL bit
(T1GCON<2>). This bit is valid even when the Timer1
gate is not enabled (TMR1GE bit is cleared).
Set by Hardware on
Falling Edge of T1GVAL
Cleared by Hardware on
Falling Edge of T1GVAL
TIMER1 GATE VALUE STATUS
N + 2
 2010 Microchip Technology Inc.
Cleared by
Software