1-770903-0 TE Connectivity, 1-770903-0 Datasheet - Page 3

• Manufacturer Part Number: 1-770903-0
• Description: CONTACT, PIN, 22-18AWG, CRIMP
• Manufacturer: TE Connectivity
• Series: Mini-Universal MATE-N-LOKr

Specifications of 1-770903-0

• Contact Material: Brass
• Contact Plating: Gold
• Contact Termination: Crimp
• Wire Size (awg): 22-18
• Rohs Compliant: Yes
• Contact Gender: Pin
• Product Type: Contacts
• Voltage Rating: 600 V
• Current Rating: 9.5 A
• Mounting Style: Snap In
• Termination Style: Quick Connect
• Wire Gauge Range: 22-18
• Connector Line: Mini-Universal MATE-N-LOK
• Wire Insulation Diameter (mm [in]): 1.50 – 2.79 [0.059 – 0.110], 3.38 [0.133]
• Voltage (vac): 600
• Current Rating (a): 9.5
• Termination Method: Crimp
• Solder Tail Contact Plating: Bright Tin-Lead over Nickel
• Wire Range (mm [awg]): 0.30-0.90² [22-18], (2) 0.30-0.40² [(2) 22]
• Contact Diameter (mm [in]): 0.99 [0.039]
• Stock Thickness (mm [in]): 0.20 [0.008]
• Contact Type: Pin
• Contact Termination Type: Crimp
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Gold (30)
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Method: Strip
• For Use With: Mini-Universal MATE-N-LOK Connectors
• Lead Free Status / Rohs Status: Details

Vibration, sinusoidal.
Mechanical shock.
Durability.
Contact retention.
Contact insertion force.
Mating force.
Unmating force.
Housing lock strength.
Housing panel retention.
Thermal shock.
Rev D
Test Description
No discontinuities of 10
microseconds or longer duration.
See Note.
No discontinuities of 10
microseconds or longer duration.
See Note.
See Note.
Contacts shall not dislodge.
See Note.
13.3 N [3 lbf] maximum per contact. TE Spec 109-41.
6.7 N [1.5 lbf] maximum per circuit
initial.
0.7 N [.15 lbf] minimum per circuit
final.
40 N [9 lbf] minimum.
133.4 N [30 lbf].
See Note.
Figure 1 (continued)
ENVIRONMENTAL
Requirement
EIA-364-28, Test Condition I.
Subject mated specimens to 10-55-
10 Hz traversed in 1 minute with 1.5
mm [.06 in] maximum total
excursion. 2 hours in each of 3
mutually perpendicular planes.
See Figure 5.
EIA-364-27, Method A.
Subject mated specimens to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 6.
EIA-364-9.
Mate and unmate tin plated
specimens for 20 cycles, and gold
plated specimens for 50 cycles at a
maximum rate of 500 cycles per
hour.
EIA-364-29.
Apply an axial load of 35.6 N [8 lbf]
at a maximum rate of 12.7 mm [.5
in] per minute.
Measure force necessary to insert a
contact into the housing at a
maximum rate of 12.7 mm [.5 in]
per minute.
EIA-364-13.
Measure force necessary to mate
specimens without locking latches
at a maximum rate of 12.7 mm [.5
in] per minute.
EIA-364-13.
Measure force necessary to unmate
specimens at a maximum rate of
12.7 mm [.5 in] per minute.
EIA-364-98.
Determine housing lock strength at
maximum rate of 12.7 mm [.5 in]
per minute.
Determine housing panel retention
at maximum rate of 12.7 mm [.5 in]
per minute.
EIA-364-32, Test Condition VII.
Subject specimens to 25 cycles
between -55 and 105° C.
Procedure
108-1542
3 of 10