D4GSN1R5 Omron, D4GSN1R5 Datasheet - Page 9

• Manufacturer Part Number: D4GSN1R5
• Manufacturer: Omron
• Type: Safety-Door Switchr

Specifications of D4GSN1R5

• Switch Function Configuration: N.O./N.C.
• Current Rating (max): 0.75A
• Operating Temp Range: -30C to 70C
• Lead Free Status / Rohs Status: Compliant

The Switch contacts can be used with either standard loads or
microloads. Once the contacts have been used to switch a load,
however, they cannot be used to switch smaller loads. The contact
surfaces will become rough once they have been used and contact
reliability for smaller loads may be reduced.
Mounting Methods
Appropriate Tightening Torque
Mounting Hole Dimensions for Switches
Mounting Hole Dimensions for Operation Keys
Operation Key
• Loose screws may result in malfunction. Tighten the screws to the
Body mounting
screw
Operation Key
mounting screw
• Use the specified sizes of mounting screws flat or spring washers
• As shown below, mount the Operation Key after matching the
• Depending on the conditions in which the Switch is used, the
specified torques.
to mount the Switch and Operation Key, and tighten the screws to
the proper tightening torque. To ensure safety, use screws that
cannot be easily removed or another means to prevent the Switch
and Operation Key from easily being removed.
concave surface of the Operation Key with the convex surface of
the insertion face.
rubber of the Operation Key may deteriorate. If the rubber
becomes deformed or cracked, replace it as soon as possible.
Type
D4GS-NK1/NK2
14±0.1
Precautions for Correct Use
Two, M4
0.75 to 1.15 N·m
0.75 to 1.15 N·m
Torque
Two, M4
20±0.1 or 22±0.1
D4GS-NK4
Two, M4
M4 screw
M4 screw
Size
Wiring
Identifying Wires
Identify wires according to the color (with or without white lines) of the
insulation on the wire.
Terminal Numbers
Dummy insulator (black) External insulation sheath
Safety contact (blue 11)
Safety contact (brown 21)
Auxiliary contact (orange 31)
Safety contact (blue 11)
Auxiliary contact (orange 31)
Safety contact (blue 11)
Auxiliary contact (orange 33)
Safety contact (blue 11)
Safety contact (brown 21)
Auxiliary contact (orange 33)
• Identify terminal numbers based on the color of the insulation on
• The safety and auxiliary contacts of D4GS-N models of
• The auxiliary contacts (orange) can be used as safety contacts.
• The safety contacts are direct opening contacts certified by EN and
• Cut the black dummy insulator and all unused wires at the end of
the wire.
three-terminal contact construction and those of two-terminal
contact construction are described below. The following shows
contact form with key inserted.
each of them is indicated with the mark
the external insulation sheath when wiring the cable.
<3NC>
<1NC/1NO>
<2NC>
<2NC/1NO>
Cross section
Insulation
Zb
Zb
Zb
Zb
12 Blue/white
22 Brown/white
32 Orange/white
12 Blue/white
34 Orange/white
12 Blue/white
32 Orange/white
12 Blue/white
22 Brown/white
34 Orange/white
Core Insulator Colors
Blue/white, Brown/white,
Orange/white, Orange,
Brown, and Blue
Example: Orange/white is
an orange insulator with a
white line.
.
D4GS-N
9