B6TS16LFDEFAULT Omron, B6TS16LFDEFAULT Datasheet - Page 7

• Manufacturer Part Number: B6TS16LFDEFAULT
• Manufacturer: Omron

Specifications of B6TS16LFDEFAULT

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Connection Diagram (example)
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Text
Capacitive Touch Sensing ICs - B6TS
1033
Connect Rr, Cr, Rc, and Cc to each touch electrode, as shown in the above figure.
Refer to the design tool (B6TWorkbench) for their actual values.
Connect a bypass capacitor of about 0.1 µF between Vdd and Vss using as short wires as possible.
Connect a bypass capacitor of about 0.01µF between /SETUP pin and Vss.
When UART is not used, connecting RxD pin (29 pin) to VDD through a pull-up resistor is possible as near from this IC.
When 3-wire SPI is used (in case of pull-down at IFSEL), MOSI terminal works as SD (IO) and MISO is not
available (OPEN)
Rr =
Rc =
Cc =
Cr =
10kW
3.9kW
0.1µF
15pF(Cr0, Cr1)
18pF (Cr2, 4)
22pF (Cr3, Cr5-7)