AMSRL-783.3-NZ Aimtec Inc., AMSRL-783.3-NZ Datasheet - Page 3

• Manufacturer Part Number: AMSRL-783.3-NZ
• Description: DC/DC SWITCHING REGULATOR
• Manufacturer: Aimtec Inc.

It is recommended that ceramic capacitors are used for C2 & C3.
It is recommended to install C3 to improve performance.
C1 & C2 are required and should be installed as close to the converter as possible
If it is needed to adjust the output voltage higher or lower than the converter’s nominal value use the equations in the table
above to calculate appropriate resistor values, insuring that the voltage is within the adjustment range for the converter used.
If no voltage adjustment is needed connect a 470pF ceramic capacitor from pin 6 to ground.
Application Circuit
Model Number
AMSRL-783.3-NZ
AMSRL-7805-NZ
AMSRL-7812-NZ
AMSRL-7815-NZ
Model Number
www.aimtec.com
F 051e R8.D
AMSRL-783.3-NZ
AMSRL-7805-NZ
AMSRL-7812-NZ
AMSRL-7815-NZ
Output (V)
Nominal
C2 (uF)
3.3
12
15
5
22
22
10
10
Vout Adjusted Up
R2 (KΩ)
Tel: [phone]
3 of 4
Vout Adjusted Down
R1 (KΩ)
Up to 7.5 Watt | DC-DC Converter
Series AMSRL-78-NZ
Toll free: + 1 888 9 AIMTEC
North America only
(924 6832)