1-794407-0 TE Connectivity, 1-794407-0 Datasheet - Page 2

• Manufacturer Part Number: 1-794407-0
• Manufacturer: TE Connectivity

Specifications of 1-794407-0

• Product Type: Contact
• Connector Line: Mini-Universal MATE-N-LOK
• Wire Insulation Diameter (mm [in]): 2.01 – 3.20 [0.079 – 0.126]
• Voltage (vac): 600
• Termination Method: Crimp
• Solder Tail Contact Plating: Matte Tin over Nickel
• Wire Range (mm [awg]): 0.50-1.40² [20-16]
• Contact Type: Socket
• Contact Termination Type: Crimp
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Gold (30)
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Method: Strip

3.3.
3.4.
3.5.
Initial examination of product.
Final examination of product.
Dry circuit resistance.
Insulation resistance.
Withstanding voltage.
Temperature rise vs current.
Termination tensile strength.
Rev D
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Voltage: 600 volts AC or DC
Current: 11.2 amperes maximum
Temperature: -55 to 105° C
Meets requirements of product
drawing.
Meets visual requirements.
10 milliohms maximum initial.
20 milliohms maximum final.
1000 megohms minimum initial.
100 megohms minimum final.
1 minute hold with no breakdown or
flashover.
30° C maximum temperatur e rise at
specified current.
Wire Size
AWG
Figure 1 (continued)
30
28
26
24
22
20
18
16
MECHANICAL
ELECTRICAL
Requirement
Newtons [lbf]
(Minimum)
102.3 [23]
13.3 [3]
17.8 [4]
31.1 [7]
48.9 [11]
62.3 [14]
80.1 [18]
8.9 [2]
EIA-364.
Visual and dimensional (C of C)
inspection per product drawing.
EIA-364.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
Test between adjacent contacts of
mated specimens.
EIA-364-20, Condition I.
1500 volts AC at sea level. Test
between adjacent contacts of mated
specimens.
EIA-364-70, Method 1.
Stabilize at a single current level
until 3 readings at 5 minute intervals
are within 1° C.
See Figure 4.
EIA-364-8.
Determine crimp tensile at a
maximum rate of 25 ± 6 mm [.98 ±
.24 in] per minute.
Procedure
108-1542
2 of 10