267-150 Xicon, 267-150 Datasheet - Page 2

• Manufacturer Part Number: 267-150
• Description: Resistor Networks & Arrays USE 267-150-RC
• Manufacturer: Xicon
• Series: SIPr

Specifications of 267-150

• Product Type: Networks
• Circuit Type: Isolated
• Number Of Resistors: 3
• Resistance: 150 Ohms
• Tolerance: 2 %
• Power Rating: 0.125 Watt (1/8 Watt)
• Temperature Coefficient: +/- 200 PPM / C
• Number Of Pins: 6
• Package / Case: SIP-6
• Dimensions: 5.08 mm W x 15.3 mm L x 2.5 mm H
• Lead Spacing: 2.54 mm
• Termination Style: SIP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Network Resistors
XC-600047
CHARACTERISTICS
Dielectric Withstanding
Specifications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on producer documentation.
Characteristics
Soldering Heat
Resistance to
Temperature
Temperature
Solderability
in Humidity
Resistance
Coefficient
Short-time
Insulation
Load Life
Load Life
Overload
Terminal
Strength
Thermal
Voltage
Cycling
Shock
XICON PASSIVE COMPONENTS • [phone]
±250 PPM°C for< 50Ω or >1MΩ
±200 PPM°C for 50Ω ~ 1MΩ
mechanical damage, arcing,
or insulation break down.
No evidence of flashover
∆R≤ ±(0.5% + 0.1Ω)
Resistor Network-Sip RNL Series
± (0.5% + 0.1Ω)
± (0.5% + 0.1Ω)
± (0.5% + 0.1Ω)
± (0.5% + 0.1Ω)
10,000MΩ Min.
Covering 95%
± (3% + 0.1Ω)
± (3% + 0.1Ω)
Limits
* Step 1-4 Continuous 5 Cycles
90° metallic V-block and shall be tested at AC
Step
Resistors shall be clamped in the trough of a
Over 2 hrs. in room temp. before measuring
potential respectively specified in the above
1
2
3
4
70°C at Rated Voltage for 1,000 hrs.
(1.5 hour is “ON”, 0.5 hour is “OFF”)
(1.5 hour is “ON”, 0.5 hour is “OFF”)
Rated Voltage x 2.5 for 5 seconds.
Load V, Room Temp, 30 minute
350°C ± 10°C, for 3 seconds.
Rated Voltage for 1,000 hrs.
Unload, -55°C, 15 minutes
245°C ± 3°C, 2-3 seconds
list for 60 +10/-0 seconds
Tensile: 1Kg, 30 seconds
Bending: 500g, 2 times
100VDC for 1 minute
+125°C ± 3°C
40°C, 90-95% RH
Temperature
Room temp.
Room temp.
-55°C ± 3°C
-55°C ~ +125°C
(JIS C 5201-1)
Test Methods
SIP Series
Date Revised: 9/27/05
10~15 mins
10~15 mins
30 mins
30 mins
Time