ST4ETA 100K

Manufacturer Part NumberST4ETA 100K
DescriptionTrimmer Resistors - SMD ST4ETA104 4MM SINGLE-TURN
ManufacturerVishay
ST4ETA 100K datasheet
 

Specifications of ST4ETA 100K

Resistance100 KOhmsTolerance20 %
ProductTrimmer Resistors - SMDTermination StyleSMD/SMT
Lead Free Status / Rohs StatusLead free / RoHS Compliant  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
Page 1/4

Download datasheet (71Kb)Embed
Next
ST
Vishay
Super Tan
Vishay ST represents a major breakthrough in wet tantalum
capacitor technology. Its unique cathode system provides
the highest capacitance per unit volume. The design
facilitates a doubling of capacitance, lower ESR and higher
ripple current rating compared with conventional wet
tantalum products. Moreover, the ST has the capacitance
stability of a solid tantalum capacitor and there are no circuit
impedance restrictions.
The ST is housed in an all tantalum, hermetically sealed case
and is manufactured to withstand hazardous environments.
The ST is used widely in the defense and aerospace
industries and whenever there is a space problem
DIMENSIONS in inches [millimeters]
TERMINAL WELDED
TO CASE
0.094 (2.38)
MAX.
E
CASE CODE
D MAX. INSULATED
T1
0.219 (5.56)
T2
0.312 (7.92)
L2
0.312 (7.92)
T3
0.406 (10.31)
T4
0.406 (10.31)
Notes
1. Material at egress is tantalum
2. Insulation sleeving will lap over the ends of the capacitor case.
3. Tinned nickel leads, solderable and weldable
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
80
®
Wet Tantalum Capacitors
with Hermetic Seal
FEATURES
• Terminations:
100
%
terminations:
• Very High Capacitance
• 10 to 1800 µF
• 25 to 125 VDC
• - 55 °C to + 125 °C
• Very Low ESR
• High Ripple Current
• All Tantalum Case
• Hermetically Sealed
• Low DCL
• Compliant to RoHS Directive 2002/95/EC
APPLICATION NOTES
a) No continuous reverse voltage permissible.
b) The peak of the applied AC ripple and the applied DC
voltage must not exceed the DC voltage rating of the
capacitor.
c) Ripple current ratings by part number at 85 °C and 40 kHz
are included in the table. Ripple current correction factors
for other temperatures and frequencies are given on the
next page.
d)Transient reverse voltage surges are acceptable under
the following conditions:
The peak reverse voltage does not exceed 1.5 V and the
peak current times the duration of the reverse transient
does not exceed 0.05 ampere seconds. In addition, the
repetition frequency of the reverse voltage surge is less
than 10 Hz.
0.025 + 0.002
0.250 (6.35)
(0.64 + 0.05)
MAX.
“D” DIA.
L
E
D ± 0.016 (0.41)
L + 0.031 (0.79) UNINSULATED
0.188 (4.78)
0.453 (11.51)
0.281 (7.14)
0.641 (16.28)
0.281 (7.14)
1.008 (25.60)
0.375 (9.52)
0.766 (19.46)
0.375 (9.52)
1.062 (26.97)
Approx. Weight
T1: 2.3 g, T2: 5.7 g
T3: 9.4 g, T4: 14.8 g
For technical questions, contact:
tantalum@vishay.com
Standard
tin/lead
(Sn/Pb)
tin
(RoHS
compliant)
available
TERMINAL LOCATION
WITHIN 0.031 OF CENTER
E ± 0.250 (6.35) MAX.
1.500 (38.10)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
Document Number: 43000
Revision: 06-Nov-09
Pb-free
Available
RoHS*
COMPLIANT

ST4ETA 100K Summary of contents

  • Page 1

    ... ST Vishay Super Tan Vishay ST represents a major breakthrough in wet tantalum capacitor technology. Its unique cathode system provides the highest capacitance per unit volume. The design facilitates a doubling of capacitance, lower ESR and higher ripple current rating compared with conventional wet tantalum products. Moreover, the ST has the capacitance stability of a solid tantalum capacitor and there are no circuit impedance restrictions ...

  • Page 2

    ... VDC at 125 ° 1050 ST68-50T1MI + 1800 ST220-50T2MI + 2900 ST450-50L2MI + 2100 ST470-50T3MI + 2750 ST680-50T4MI 40 VDC at 125 ° 1050 ST47-60T1MI + 1800 ST150-60T2MI + 2900 ST370-60L2MI + 2100 ST390-60T3MI + 2750 ST560-60T4MI 50 VDC at 125 ° 1050 ST33-75T1MI + 1650 ST110-75T2MI + 2500 ST250-75L2MI + 2100 ST330-75T3MI + 2750 ST470-75T4MI www.vishay.com ST Vishay 81 ...

  • Page 3

    ... For technical questions, contact: tantalum@vishay.com AC RIPPLE 85 °C 40 kHz PART NUMBER mA 85 °C 125 °C rms 65 VDC at 125 ° 1050 ST15-100T1MI + 1650 ST68-100T2MI + 2200 ...

  • Page 4

    ... Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part ...