PVG3A104A01R00 Murata, PVG3A104A01R00 Datasheet - Page 5

• Manufacturer Part Number: PVG3A104A01R00
• Description: Trimmer Resistors - SMD 100K OHM SMD 3MM
• Manufacturer: Murata
• Series: PVG3Ar

Specifications of PVG3A104A01R00

• Resistance: 100 KOhms
• Tolerance: 30 %
• Power Rating: 0.25 Watt (1/4 Watt)
• Element Type: Cermet
• Product: Trimmers
• Termination Style: SMD/SMT
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

!Note
!Note
1. Use suitable screwdrivers that fit comfortably in
1. Please make sure that your product has been
2. Murata cannot guarantee trimmer potentiometer
Reflow Soldering Standard Profile
Notice (Handling)
driver slot.
* Recommended screwdriver for manual adjustment
* Recommended screwdriver bit for automatic
We can supply the screwdrivers above.
If you place order, please specify the Murata P/N.
Notice (Other)
evaluated and confirmed against your
specifications when our product is mounted to your
product.
integrity when used under conditions other than
those specified in this document.
Continued from the preceding page.
construction and/or the cleaning condition such
as the depth of immersion, please check the
cleaning equipment to determine the suitable
TORAY INDUSTRIES, INC. : SA-2225
adjustment
TORAY INDUSTRIES, INC. : JB-2225
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
260
230
200
150
100
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
0
(Murata P/N : KMDR070)
(Mutata P/N : KMBT070)
Pre-heating in air
60-120 sec.
(Melting zone)
40 sec. max.
Soldering
Gradual cooling
in air
Time
2. Don't apply more than 9.8N (Ref.; 1kgf) of twist
3. When adjusting with an adjustment tool, the applied
4. When using a lock paint to fix slot position,
and stress after mounting onto PCB to prevent
contact intermittence.
force to the adjustment screw should not exceed
4.9N (Ref.; 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series").
conditions. If the condition is not suitable,
the trimmer potentiometer may deviate from
specified characteristics.
PVG3 Series Notice
R50E13.pdf 04.6.11
27
4