88-552645-13S Amphenol, 88-552645-13S Datasheet - Page 280

• Manufacturer Part Number: 88-552645-13S
• Description: Circular MIL / Spec Connectors TV Series MIL-DTL-38999 III
• Manufacturer: Amphenol
• Series: TV Seriesr

Specifications of 88-552645-13S

• Mil Type: MIL-DTL-38999 III
• Product Type: Connectors
• Shell Style: Plug
• Shell Size: 17
• Insert Arrangement: 17-13
• Mounting Angle: Straight
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

EMI Capabilities
For Maximum Design Flexibility
The Amphenol
technologies to provide the user with the most cost effective
performance across the frequency range. (For EMP perfor-
mance data, see pages 332-336).
The tubular design offers over 40 years of proven field
reliability. All filter contacts within the connector share a
common ground plane, which is connected to the connector
shell. The pin to pin isolation is 85 dB minimum at 100 MHz.
The planar design joins pins to a multi-layered ceramic,
forming an array sub-assembly with a peripheral ground. This
is connected to the connector shell via a ground spring. Pin to
pin capacitance is less than 50 pf with a pin-to-pin isolation of
85 dB minimum at 100 MHz. Filter contacts for both designs
contain either a pi passive element network comprised of a
ferrite inductor and ceramic capacitor, or a single capacitor.
Shell
Filter
Contact
Assembly
Interfacial
Seal
External Margin
Solder Joint
Ceramic Capacitor
Hard Faced
Insert
Pi Type Tubular Contact Assembly
®
Gasket
EMI filter connector utilizes two manufacturing
TUBULAR ASSEMBLY
Ground Electrode
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Hot Electrodes
Internal Margin
Ground Plate
External Margin
Ferrite Inductor
Oven Cured
Epoxy
Solder Joint
For planar designs, other filter networks are available, ie.
T Type, L-C Type, C-L Type and C Type. An encapsulant of
oven-cured epoxy in the rear provides:
•
•
Shell
Interfacial
Seal
Mechanical and thermal insulation of the ceramic
elements – mechanical loading can be accomplished
without capacitor damage. Pins can be bent 90° and
straightened with no damage to the filter.
Hermeticity (4.6 x 10
entering through the rear of the connector in high
humidity environments. Amphenol recommends using
metal protection caps during cleaning operations.
Solder Washer
or Spring
Clip
Gasket
Pi Type Planar Array Assembly
PLANAR ASSEMBLY
-3
cc/sec) – prevents water from
Amphenol
Grounding Ring
Hard Faced
Insert
Grounding
Ring
Ferrite
Ferrite Inductor
Aerospace
Oven Cured
Epoxy
Potting Seal
Contact and
Planar
Assembly
Hot
Electrode
Ground
Electrode
279